Koramel Enamel LT313 Alkyd Topcoat is an alkyd coating used as a topcoat. Parameters on this page: volume solids approx. 48% (per ISO 3233); dry film thickness 40 µm; theoretical spreading rate 4.8 m²/L/100 µm. Comparable products from the same brand: Koramel Enamel LT313 Alkyd Topcoat, Korabor Enamel RT546-FLUORESCENT RED Heavy-duty Topcoat, Koramel Primer H.B. MP120 Modified Alkyd Primer.
Source: KCC original technical data sheet (TDS) 'Koramel Enamel LT313 Alkyd Topcoat'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | Approx. 48% |
|---|---|
| Dry Film Thickness | 40 µm |
| Theoretical Spreading Rate | 4.8 m²/L at 100 µm |
| VOC | 445 g/L |
| Density / Specific Gravity | Approx. 1.2 kg/L |
| Number of Components | One-component |
| Flash Point | 38 °C/100 °F (closed cup) |
| Thinner | No. 002 |
| Colour / Appearance | Semi-gloss. White (1000), red-brown (2260), green (4440) |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
LT313 is an alkyd-resin-based topcoat for ships and steel structures, with high resistance to UV sunlight, seawater, mineral oil and temperature (e.g. normal water radiator temperature). Approved as a fire-resistant coating by Lloyd's Register (LR), Nippon Kaiji Kyokai (NK), Korean Register (KR), DNV (CE Marking) and Germanischer Lloyd (GL).
Used as a topcoat for engine rooms, including main and auxiliary machinery; as a multipurpose topcoat for interior surfaces; and on exterior steel surfaces in moderately corrosive environments, including ship superstructures.
| Appearance and colour | Semi-gloss. White (1000), red-brown (2260), green (4440) |
|---|---|
| Volume Solids | Approx. 48% (per ISO 3233) |
| VOC | 445g/L |
| Theoretical Spreading Rate | On smooth surfaces: 12.0 m²/L at 40 µm dry film thickness |
| density | Approx. 1.2 |
| Flash Point | 38 °C/100 °F (closed cup) |
Before application, remove all oil, grease, dust and other contaminants from the surface by suitable methods such as solvent cleaning and fresh water washing.
The surface to be coated must be completely clean and dry. Relative humidity must not exceed 85%, and the surface temperature must be at least 2.7 °C (5 °F) above the dew point to avoid condensation.
Koramel Primer H.B. MP120, Koramel Primer MP125, or per specification.
Thinner No. 002.
Apply by roller, brush or spray (air or airless). Airless spray: nozzle tip 432–584 µm (0.017″–0.023″); nozzle pressure 14.5 MPa; fan width 40°–60°.
Dry film thickness 40 µm.
| Substrate Temperature | 5°C/41℉ | 20°C/68℉ | 30°C/86℉ |
|---|---|---|---|
| Touch Dry | 8 h | 2 h | 1 h |
| Hard Dry | 36 h | 8 h | 7 h |
At 20 °C/68 °F, minimum 6 h, maximum unlimited (over itself and over epoxy primer).
Continuous: 93 °C/200 °F (non-immersion areas); intermittent: 121 °C/250 °F (non-immersion areas).
| Shelf life | 36 months |
|---|---|
| Standard packaging sizes | 20L, 18L, 4L |
Protect skin and eyes; avoid prolonged inhalation of solvent vapour. Ensure adequate ventilation; keep away from sparks and open flames. November 2016, 13th revision.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item numbers of Koramel Enamel LT313 Alkyd Topcoat are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| LT313 7.5BG7 | 2 | 20 L |
| LT313-1000 White | — | 20 L |
This model has a total of2item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
