Korabor Enamel RT546-FLUORESCENT RED heavy-duty topcoat is a topcoat. Parameters on this page: volume solids approx. 43% (according to ISO 3233), dry film thickness 40 µm, theoretical spreading rate 4.32 m²/L/100 µm. Comparable products from the same brand: Korabor Enamel RT546-FLUORESCENT RED heavy-duty topcoat, Korepox Top Coat-ET6572 fresh water tank coating, Koramel Enamel LT313 alkyd topcoat.
Parameter source: KCC original technical data sheet (TDS) \"Korabor Enamel RT546-FLUORESCENT RED Heavy-duty Topcoat (Fluorescent Red)\"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | Approx. 43% |
|---|---|
| Dry Film Thickness | 40 µm |
| Theoretical Spreading Rate | 4.32 m²/L /100 µm |
| VOC | Approx. 500 g/L |
| Density / Specific Gravity | Approx. 1.01 kg/L |
| Number of Components | One-component |
| Flash Point | 38 °C/100 °F (closed cup) |
| Thinner | No. 002 |
| Colour / Appearance | Matte, fluorescent red. For other colours, consult the KCC sales department |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
RT546-FLUORESCENT is an air-drying acrylic paint containing fluorescent pigments, with a strong colour impression and high visibility. This product has no effect in the dark.
Recommended for warning sign and signal colour areas.
| Appearance and colour | Matte, fluorescent red. For other colours, consult the KCC sales department |
|---|---|
| Volume Solids | Approx. 43% (according to ISO 3233) |
| Volatile organic compound content | Approx. 500 (g/L) |
| Theoretical Spreading Rate | 10.8 m²/L at 40 µm DFT on a smooth surface |
| density | Approx. 1.01 |
| Flash Point | 38 °C/100 °F (closed cup) |
Before application, remove all oil, grease, dust and other contaminants from the surface by suitable methods such as solvent cleaning and fresh water washing.
Surfaces to be coated shall be completely clean and dry. Relative humidity shall not exceed 85%; surface temperature shall be at least 2.7 °C above the dew point to avoid condensation. Suitable substrate temperature 5–40 °C.
Can be recoated over epoxy primer, epoxy topcoat, polyurethane topcoat, or according to specification. Better results are obtained over a white/light-coloured primer.
Thinner No. 002.
Roller or brush application of 2–3 coats to the specified film thickness is preferred; spraying (conventional or airless) is also possible. Airless spray: nozzle tip size 432–533 µm (0.017″–0.021″); nozzle pressure 14.5 MPa; fan 40°–60°.
Dry film thickness 40 µm.
| Substrate Temperature | 5°C/41℉ | 20°C/68℉ | 30°C/86℉ |
|---|---|---|---|
| Touch Dry | 6 h | 2 h | 1 h |
| Hard Dry | 24 h | 4 h | 3 h |
At 20 °C/68 °F: minimum 4 h, maximum unlimited.
Continuous: 66 °C/147 °F (non-immersion area); Intermittent: 82 °C/180 °F (non-immersion area).
| Shelf life | 12 months |
|---|---|
| Standard packaging sizes | 4L, 18L, 20L |
Protect skin and eyes from direct contact with liquid paint; avoid prolonged breathing of solvent vapour. Maintain adequate ventilation; keep away from sparks and open flames. Issued 1 March 2024, 11th revision.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
