Korepox Primer EP1760 Epoxy Primer is an epoxy coating used as a primer. Parameters on this page: volume solids approx. 65% (determined in accordance with ISO 3233), dry film thickness 100 µm, theoretical spreading rate 6.5 m²/L/100 µm. Comparable products of the same brand and type: KOREPOX EH2350 High-build Epoxy Primer, KOREPOX EH2350 Epoxy Primer, Korepox Holding Primer EP1700 Epoxy Primer.
Parameter source: KCC original technical data sheet (TDS) 'Korepox Primer EP1760 Epoxy Primer'; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | Approx. 65% |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 6.5 m²/L /100 µm |
| VOC | 360 g/L |
| Density / Specific Gravity | Approx. 1.5 kg/L (after mixing) |
| Number of Components | Two-component |
| Colour / Appearance | Flat. Grey (1135), ivory (3203, 3332) |
| Packaging Specifications | 18.2L(EP1760 PTA: 15.6L, EP1760 PTB: 2… |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
EP1760 is a two-component modified polyamide-cured epoxy resin primer containing a large amount of zinc phosphate anti-corrosive pigment. It is suitable for non-ferrous metal surfaces that cannot be abrasive-blasted prior to application, and forms a hard film with good adhesion, abrasion resistance and impact resistance.
As a multi-purpose primer, it is used on indoor and outdoor steel surfaces or non-ferrous metal surfaces (e.g. aluminium and stainless steel SUS) in moderately or severely corrosive environments and coastal and marine environments. It can be applied as a primer after solvent cleaning without abrasive blasting.
| Appearance and colour | Flat. Grey (1135), ivory (3203, 3332) |
|---|---|
| Volume solids | Approx. 65% (determined in accordance with ISO 3233) |
| Volatile Organic Compounds | 360g/L |
| Theoretical Spreading Rate | On smooth surfaces, 6.5 m²/L at a dry film thickness of 100 µm |
| density | After mixing, approx. 1.5 |
| Flash Point | Base (EP1760 PTA): 26 °C/79 °F (closed cup) |
Remove all oil, grease, dust and other contaminants from the surface to be coated before application. Steel: abrasive-blast clean to Sa2.5 or power-tool clean to St3, St2, etc.
The surface to be coated shall be completely clean and dry; the relative humidity shall not exceed 85%, and the surface temperature shall be at least 2.7 °C (5 °F) above the dew point to avoid condensation.
Base:hardener = 6:1 (by volume). Mix in the specified ratio before application and stir thoroughly with a power mixer.
3 h at 20 °C/68 °F.
Dry film thickness 100 µm.
| Substrate Temperature | 5°C/41℉ | 20°C/68℉ | 30°C/86℉ |
|---|---|---|---|
| Touch Dry | 1 h | 30 min | 20 min |
| Hard Dry | 20 h | 4 h | 2.5 h |
Continuous: 93 °C/200 °F (non-immersion areas); intermittent: 121 °C/250 °F (non-immersion areas).
| Shelf life | EP1760PTA (base): 12 months; EP1760PTB (hardener): 24 months |
|---|---|
| Standard packaging sizes | 18.2L(EP1760 PTA: 15.6L, EP1760 PTB: 2.6L) |
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item numbers of Korepox Primer EP1760 Epoxy Primer are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| EP1760-1135 Grey | — | 16 L |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
