Penguard Low Temp Additive epoxy low-temperature curing agent additive is an auxiliary material. Recommended for use where faster curing is required or where the substrate is coated at low temperature. Penguard HB Penguard Primer pure epoxy primer (0FC) Penguard Special pure epoxy zinc phosphate coating (0FD) mixed at a ratio of 100 (0.4 L added per 20 L). Page parameters: number of components, one-component. Comparable products of the same brand and type: Jotun Accelerator CO1P, Jotun Accelerator DMA10, Jotun Anti-skid.
Parameter source: JOTUN manufacturer's Technical Data Sheet (TDS) "Penguard Low Temp Additive epoxy low-temperature curing agent additive"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | — |
| Density / Specific Gravity | 1 kg/L |
| Number of Components | One-component |
Low-Temperature Curing Agent Additive for Epoxy
Penguard HB
Penguard Primer pure epoxy primer (0FC)
Penguard Special pure epoxy zinc phosphate coating (0FD)
| at 2 | 100 ratio (0.4 L added per 20 L). |
|---|
Recommended when faster curing is required or when coating at low substrate temperatures.
Others
| Property | Test / Standard | Description | |
| Density | Theoretical Value | 1 kg/L | |
| Region | Regulations | Test / Standard | VOC Value |
The data listed are based on factory batch production and may vary slightly with colour.
One-component
In China, the cleaning solvent must comply with GB 38508-2020
| Substrate Temperature | 2 °C | 5 °C | 10 °C | 23 °C |
| Penguard Primer | ||||
| Pure Epoxy Primer (0FC) | ||||
|---|---|---|---|---|
| Touch Dry | 10 h | 5 h | 2 h | 1 h |
| Walk-on Dry | 24 h | 16 h | 8 h | 4 h |
| Minimum recoat interval | 18 h | 12 h | 6 h | 3 h |
| Dry/cured to service | 16 days | 8 days | 4 days | |
| Penguard HB | ||||
| Pure epoxy high-build coating (370)/Penguard Special | ||||
| Pure Epoxy Zinc Phosphate (0FD) | ||||
| Touch Dry | 12 h | 6 h | 3 h | 2 h |
| Walk-on Dry | 30 h | 20 h | 10 h | 5 h |
| Minimum recoat interval | 30 h | 20 h | 10 h | 5 h |
| Dry/cured to service | 16 days | 8 days | 4 days | |
For the maximum recoat interval, refer to the Application Guide (AG) for this product.
| Touch Dry | The state at which light finger pressure leaves no mark or stickiness. |
|---|---|
| Walk-on Dry | The minimum time after which the coating allows normal foot traffic without leaving permanent footprints, marks or other physical damage. |
Minimum recoat interval after drying: the recommended minimum interval before applying the next coat.
Dry/cured to service: the minimum time before the coating can be permanently exposed to a specific environment/medium.
| Volume | Container Size | |
| (L) | ||
| Low-Temperature Curing Agent Additive for Epoxy | 0.4 | 1 |
The packaging sizes above are typical reference sizes for factory batch production. Due to regional regulatory differences, packaging sizes and capacities may vary by region.
Store in accordance with national regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
Epoxy low-temperature curing agent additive 48 months
In some markets, the stated shelf life may be shortened to comply with local legal requirements. The above is the minimum shelf life; thereafter, testing is required to confirm quality remains acceptable.
For professional use only. Applicators and workers must be trained, experienced, capable and equipped to mix, stir and apply the coating correctly in accordance with JOTUN's technical documents. Applicators and workers must wear appropriate personal protective equipment when using this product. This guidance is provided based on current product knowledge. Any proposed modification to suit site conditions must be approved by the responsible JOTUN representative before use.
Read the safety warnings on the container packaging. Use in well-ventilated conditions. Avoid inhaling spray mist and avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner, soap and water. In case of eye contact, rinse thoroughly with water and seek medical attention immediately.
When used primarily as a primer or antifouling coating, products may show slight colour variation from batch to batch. Such products, and epoxy products used as topcoats, may chalk when exposed to sunlight.
Gloss and colour retention of topcoats depend on the colour type, the surrounding environment such as temperature and UV intensity, application quality and product type. Contact your local JOTUN office for further information.
The information in this datasheet is based entirely on knowledge gained in our laboratory and in practice. JOTUN products are regarded as semi-finished products, and their use is generally beyond our control. JOTUN therefore guarantees only the quality of the product itself. To comply with local regulations, the product may be adjusted, and we reserve the right to modify the datasheet without further notice.
Users should consult JOTUN for specific guidance on the suitability of the product for their requirements and applications.
In case of any discrepancy between language versions, the English (UK) version shall prevail.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
