Jotun Anti-skid is an auxiliary material. Suitable for helipads, walkways, ramps, ship bridge decks, general decks and other areas requiring slip resistance. Alumina particles for broadcast onto the final coat in anti-skid coating systems. Parameters on this page: volume solids 100%, number of components: one-component. Comparable products of the same brand: Jota Alfa additive, Jota Fulfill 100 unsaturated polyester fairing compound, Jotatherm CSP1 Scrim low-temperature spillage-resistant coating reinforcement mesh.
Parameter source: JOTUN manufacturer's Technical Data Sheet (TDS) "Jotun Anti-skid"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 100% |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | — |
| Density / Specific Gravity | 3.9 kg/L |
| Number of Components | One-component |
Jotun Anti-skid
Alumina particles for broadcast onto the final coat in anti-skid coating systems. Available in extra coarse, coarse, medium and fine grit sizes. Suitable as anti-skid material in many coating systems for atmospheric environments. Suitable for any type of surface, depending on the specific coating system.
Suitable for helipads, walkways, ramps, ship bridge decks, general decks and other areas requiring slip resistance. Broadcast onto the wet film during application.
Others
Black
Slight colour variation may occur between grades and batches.
| Property | Test / Standard | Description | |
| Volume Solids | ISO 3233 | 100% | |
| Density | Theoretical Value | 3.9 kg/L | |
| Region | Regulations | Test / Standard | VOC Value |
The data listed are based on factory batch production and may vary slightly with colour.
One-component
In China, the cleaning solvent must comply with GB 38508-2020
Depending on the actual exposure conditions in service, this product may be used with various primers and topcoats. Some reference systems are listed below. For specific systems, contact JOTUN.
| Previous coat: | Acrylic, alkyd, epoxy, modified epoxy, polyurethane |
| Subsequent coat: | Acrylic, alkyd, epoxy, modified epoxy, fluoropolymer, polyurethane, polysiloxane |
Recommended dosage
Fine grade (180–250 µm) for coatings with 50–150 µm dry film thickness, such as topcoats.
Recommended dosage: 1.5–2.0 kg per 10 L of paint.
Medium grade (400–600 µm) for coatings with 150–400 µm dry film thickness, such as Jotamastic products and high-build topcoats.
Recommended dosage: 2.5–3.3 kg per 10 L of paint.
Coarse grade (700–1000 µm) for coatings with 400–1500 µm dry film thickness, such as Baltoflake products.
Recommended dosage: 3.0–4.0 kg per 10 L of paint.
Extra coarse grade (1200–1600 µm) for coatings with 400–1500 µm dry film thickness, such as Baltoflake products.
Recommended dosage: 3.5–4.0 kg per 10 L of paint.
Increase the dosage if a rougher surface is required.
Weight
JOTUN Anti-skid 25 kg
The packaging sizes above are typical reference sizes for factory batch production. Due to regional regulatory differences, packaging sizes and capacities may vary by region.
Store in accordance with national regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
JOTUN Anti-skid 48 months
In some markets, the stated shelf life may be shortened to comply with local legal requirements. The above is the minimum shelf life; thereafter, testing is required to confirm quality remains acceptable.
For professional use only. Applicators and workers must be trained, experienced, capable and equipped to mix, stir and apply the coating correctly in accordance with JOTUN's technical documents. Applicators and workers must wear appropriate personal protective equipment when using this product. This guidance is provided based on current product knowledge. Any proposed modification to suit site conditions must be approved by the responsible JOTUN representative before use.
Read the safety warnings on the container packaging. Use in well-ventilated conditions. Avoid inhaling spray mist and avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner, soap and water. In case of eye contact, rinse thoroughly with water and seek medical attention immediately.
When used primarily as a primer or antifouling coating, products may show slight colour variation from batch to batch. Such products, and epoxy products used as topcoats, may chalk when exposed to sunlight.
Gloss and colour retention of topcoats depend on the colour type, the surrounding environment such as temperature and UV intensity, application quality and product type. Contact your local JOTUN office for further information.
The information in this datasheet is based entirely on knowledge gained in our laboratory and in practice. JOTUN products are regarded as semi-finished products, and their use is generally beyond our control. JOTUN therefore guarantees only the quality of the product itself. To comply with local regulations, the product may be adjusted, and we reserve the right to modify the datasheet without further notice.
Users should consult JOTUN for specific guidance on the suitability of the product for their requirements and applications.
In case of any discrepancy between language versions, the English (UK) version shall prevail.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
