Jotun Inhibitor 53 No. 53 Inhibitor belongs to Auxiliary. Recommended for use in accordance with the specific product data sheet or the application guide of the coating to be used. This product acts as an inhibitor during the curing of Baltoflake and Chemflake. Comparable models from the same brand: Jota Alfa Additive, Jota Fulfill 100 Unsaturated Polyester Fairing Compound, Jotatherm CSP1 Scrim Low-temperature Spill-resistant Coating Reinforcement Mesh.
Parameter source: JOTUN original technical data sheet (TDS) “Jotun Inhibitor 53 JOTUN53 Inhibitor”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | — |
| Density / Specific Gravity | 0.9 kg/L |
| Number of Components | — |
| Flash Point | 100 °C |
This product is a solution of an aliphatic ether of 4-tert-butylphenol. This product acts as an inhibitor during the curing of Baltoflake and Chemflake.
Use in accordance with the specific product data sheet or the application guide for the coating to be used.
Others
| Property | Test / Standard | Description |
| Flash Point | ISO 3679 Method 1 | 100 °C |
| Density | Theoretical Value | 0.9 kg/L |
The data listed are based on factory batch production and may vary slightly with colour.
4-tert-butylphenol content (theoretical value): 10%
| Volume | Container Size | |
| (L) | ||
| JOTUN No. 53 Inhibitor | 1 | |
The packaging sizes above are typical reference sizes for factory batch production. Due to regional regulatory differences, packaging sizes and capacities may vary by region.
Store in accordance with national regulations. Keep in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
JOTUN No. 53 Inhibitor 12 months
In some markets, the stated shelf life may be shortened to comply with local legal requirements. The above is the minimum shelf life; thereafter, testing is required to confirm quality remains acceptable.
For professional use only. Applicators and workers must be trained, experienced, capable and equipped to mix, stir and apply the coating correctly in accordance with JOTUN's technical documents. Applicators and workers must wear appropriate personal protective equipment when using this product. This guidance is provided based on current product knowledge.
Any proposed modification to suit site conditions must be approved by the responsible JOTUN representative before use.
Read the safety warnings on the container packaging. Use in well-ventilated conditions. Avoid inhaling spray mist and avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner, soap and water. In case of eye contact, rinse thoroughly with water and seek medical attention immediately.
When used primarily as a primer or antifouling, products may show slight colour variation from batch to batch. Likewise, fading and chalking may occur when exposed to sunlight.
The information in this datasheet is based entirely on knowledge gained in our laboratory and in practice. JOTUN products are regarded as semi-finished products, and their use is generally beyond our control. JOTUN therefore guarantees only the quality of the product itself. To comply with local regulations, the product may be adjusted, and we reserve the right to modify the datasheet without further notice.
Users should consult JOTUN for specific guidance on the suitability of the product for their requirements and applications.
In case of any discrepancy between language versions, the English (UK) version shall prevail.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
