6167B UMEGUARD MT WINTER GRADE Low-surface-requirement Special Epoxy Polyamide Paint is an epoxy coating. The product has high tolerance to steel surface condition and high anticorrosive performance. Parameters on this page: volume solids 82 ± 2%; dry film thickness 100–200 µm; theoretical spreading rate 0.122–0.244 L/m². Comparable products from the same brand: 5006 ALP 500 Epoxy Paint, 5055 BANNOH 500 Epoxy Paint, 5055D BANNOH 500 AC Epoxy Paint.
Source: CMP original technical data sheet (TDS) '6167B UMEGUARD MT WINTER GRADE Low-surface-requirement Special Epoxy Polyamide Paint'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 82 ± 2% |
|---|---|
| Dry Film Thickness | 100–200 µm |
| Theoretical Spreading Rate | 0.122-0.244 L/m2 |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | 37.0°C |
| Thinner | EPOXY THINNER A |
| Mixing Ratio | Base : curing agent = 80:20 (by volume) |
HUGOKUMARINE PAINTS,LTD.
| Type | Surface-Tolerant Special Epoxy Polyamide |
|---|---|
| Use | Can be used as a protective coating for decks, exterior of accommodation, above-water hull, ballast tanks and other steel structures. |
| Mixing Ratio | Base : curing agent = 80:20 (by volume) |
|---|---|
| Colour | Light grey, light red-brown |
| Flash Point | 37.0°C |
| Volume Solids | 82±2% |
| Theoretical spreading rate | 0.122-0.244 L/m2 |
| Thickness | Wet film 122–244 µm; dry film 100–200 µm |
(dry film 200 µm)
| Temperature | 5°C | 10°C | 20°C | |
| Drying Time | Surface Dry | 21 h | 9 h | 7 h |
| Hard Dry | 23 h | 16 h | 11 h | |
| Recoat interval | At least | 24 h | 16 h | |
| At most | 14 days | 7 days | ||
| Pot life | 6 h | 5 h | 4 h | |
| Application method | Airless spray, brush, roller |
|---|---|
| Weather | (recommended) min 5 °C |
| Humidity | Max 95% RH |
| Airless spray: viscosity | 1.5-2.5 Pa.s |
| Nozzle | (Graco)621-623 |
| Paint output pressure | 14.7-17.7 Mipa |
| Thinner | EPOXY THINNER A |
| Thinning | 0–15% by volume |
| Preceding coat | CERABOND 2000, EPICON ZINC RICH PRIMER B-2 |
| Subsequent coat | UMEGUARD MT WINTER GRADE |
| Packaging | Two-component |
Note: 1. In confined spaces or limited spaces under low-temperature conditions, ventilation is necessary to remove evaporating solvent and promote film formation during application.
2. Drying time and minimum overcoating interval extend as film thickness increases.
The text on this page was generated by OCR of the manufacturer's TDS; individual characters may differ from the original. The manufacturer's TDS prevails.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
