China-based coatings exporter — industrial & marine protective coatings from China's production bases

5084N BANNOH 1500 R Z Epoxy

Quick Specs

5084N BANNOH 1500 R Z Epoxy belongs to Epoxy. 2. Excellent recoatability with antifouling coatings. Parameters on this page: Volume Solids 64 ± 2% (ISO: 3233), Theoretical Spreading Rate 0.156–0.391 L/m², Number of Components two-component. Comparable models from the same brand: 5006 ALP 500 Epoxy, 5055 BANNOH 500 Epoxy, 5055D BANNOH 500 AC Epoxy.

Parameter source: CMP original technical data sheet (TDS) “5084N BANNOH 1500 R Z Epoxy”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.

This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.

Request a Quote

Volume Solids	64 ± 2% (ISO: 3233)
Dry Film Thickness	100–250 µm
Theoretical Spreading Rate	0.156-0.391 L/m2
VOC	319 g/L (Method 24)
Density / Specific Gravity	1.45 g/mL (ISO: 2811)
Number of Components	Two-component
Thinner	EPOXY THINNER A
Mixing Ratio	Base : curing agent = 81:19 (by volume)
Colour / Appearance	Grey, dark purple

Browse Similar Models by CategoryThis model belongs to: Epoxy

Coating Position

Primer Intermediate Coat Topcoat Auxiliary

Functional Category

Zinc-rich Primer Glass Flake Antifouling Heat-resistant Fire Protection Potable Water Tank Cold galvanizing Thermal Insulation

Resin Type

Epoxy Water-borne Polyurethane, fluorocarbon Acrylic Silicone Alkyd Inorganic Zinc Silicate Fluorocarbon Chlorinated Rubber Phenolic Vinyl Ester

Technical data

Type	Epoxy
Use	Can be used as anticorrosive coating for hull, tie coat, weather deck and superstructure

Documents

Mixing Ratio	Base : curing agent = 81:19 (by volume)
Colour	Grey, dark purple
Flash Point	Base 27.8 °C Curing Agent 24.8 °C
Density	1.45 g/mL (ISO: 2811)
Volume Solids	64 ± 2% (ISO: 3233)
Volatile organic compound content	319 g/L (Method 24)
Theoretical spreading rate	0.156 - 0.391 L/m2
Thickness	WFT 156–391 µm
Dry film	100–250 µm

(dry film 250 µm)

	Temperature	-5 °C	0 °C	5 °C	10 °C	20 °C	30 °C
Drying Time	Surface Dry	30 h	16 h	14 h	5 h	3 h	2 h
Drying Time	Hard Dry	66 h	42 h	20 h	12 h	8 h	6 h
Recoat interval	At least	66 h	42 h	20 h	12 h	8 h	6 h
Recoat interval	At most*	*	*	*
Pot life		16 h	12 h	9 h	6 h	4 h	3 h

Application conditions

Application method	Airless spray, brush
Weather: temperature	Minimum -5 °C
Humidity	Maximum 85% RH
Airless spray: viscosity	1.5-2.0Pa.s
Nozzle	Graco619, 621, 623
Paint output pressure	15-25 Mpa
Spray gun speed	60–80 cm/s
Thinner	EPOXY THINNER A
Thinning	0–15% by volume

Recommended surface preparation

The whole surface shall be clean and dry, with all contamination removed.

Preceding coat	BANNOH 1500, BANNOH 2000 Z, CERABOND 2000, EPICON ZINC RICH PRIMER B-2 and other products
Subsequent coat	SEAFLO NEO SL Z, SEAFLO NEO SL, SEA GRANDPRIX 1000 L, UNYMARINE, EPICON FINISH HB and other products
Packaging	Two-component

Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.

FAQ

How many components does 5084N BANNOH 1500 R Z have?: 5084N BANNOH 1500 R Z is a two-component product; use after mixing according to the mixing ratio in the "Application Data" table on this page.
What is the mixing ratio of 5084N BANNOH 1500 R Z?: The mixing ratio of 5084N BANNOH 1500 R Z is Base : Curing Agent = 81:19 (by volume).
What dry film thickness is typically applied for 5084N BANNOH 1500 R Z?: The conventional dry film thickness of 5084N BANNOH 1500 R Z is 100–250 µm; the specific value is determined by the coating system and design requirements.
What is the theoretical spreading rate of 5084N BANNOH 1500 R Z?: The theoretical spreading rate of 5084N BANNOH 1500 R Z is 0.156–0.391 L/m²; actual consumption is adjusted according to substrate roughness, application loss and colour hiding power.
What is the volume solids of 5084N BANNOH 1500 R Z?: The volume solids of 5084N BANNOH 1500 R Z is 64 ± 2% (ISO: 3233).
What is the VOC of 5084N BANNOH 1500 R Z?: The VOC of 5084N BANNOH 1500 R Z is 319 g/L (Method 24).
What thinner is used for 5084N BANNOH 1500 R Z?: Recommended thinner for 5084N BANNOH 1500 R Z: EPOXY THINNER A.
What is the flash point of 5084N BANNOH 1500 R Z?: The flash point of 5084N BANNOH 1500 R Z is Base 27.8 °C, Curing Agent 24.8 °C; storage, transport and application shall follow the product safety data sheet.
How long does 5084N BANNOH 1500 R Z take to dry?: Drying time of 5084N BANNOH 1500 R Z under standard conditions: drying time touch dry; actual results are affected by temperature, film thickness and ventilation.
Where can 5084N BANNOH 1500 R Z be purchased?: RichTech Industrial Technology (Shanghai) Co., Ltd. distributes industrial and marine coatings, representing brands including JOTUN, HEMPEL, International, PPG and KANSAI, and provides product selection, coating systems and quantity calculations. Company address: Changhui Building, 799 Yinxiang Road, Jiading District, Shanghai.

For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.

Similar models from the same brand — epoxy coating

View all CMP models

Purchase & Documents

Enquire / Request Quote & Lead Time View all CMP models

Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.

Factory item number list (1 in total)

The factory item numbers of 5084N BANNOH 1500 R Z Epoxy are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.

Item No.	Colour / colour code	Packaging Specifications
5084N BANNOH 1500 R Z PLUM	—	20 L

This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.