KORETHANE PRIMER UP194 Polyurethane Primer is a polyurethane coating used as a primer. Parameters on this page: volume solids approx. 38%; dry film thickness 30–40 µm; theoretical spreading rate 3.85 m²/L/100 µm. Comparable products from the same brand: KORETHANE PRIMER UP194 Polyurethane Primer, GALVANY IZ180 Inorganic Zinc Primer, Koramel Primer H.B. MP120 Modified Alkyd Primer.
Source: KCC original technical data sheet (TDS) 'KORETHANE PRIMER UP194(HD) Polyurethane Primer'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | Approx. 38% |
|---|---|
| Dry Film Thickness | 30–40 µm |
| Theoretical Spreading Rate | 3.85 m²/L/100 µm |
| VOC | — |
| Density / Specific Gravity | 1.22–1.26 kg/L |
| Number of Components | Two-component |
| Flash Point | 18 °C (closed) |
| Thinner | No.037U, 0278(HD) |
| Colour / Appearance | Flat, yellow |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
KORETHANE PRIMER UP194(HD) is a two-component anti-rust primer based on polyurethane resin, fast-drying, with very good workability, adhesion, chemical resistance and water resistance; in particular it contains no heavy metals such as chromium or lead.
An anti-rust primer for heavy equipment, railway vehicles and other automobiles.
| Appearance and colour | Flat, yellow |
|---|---|
| density | 1.22-1.26 (Kg/L) |
| Volume Solids | Approx. 38% |
| Theoretical Spreading Rate | On smooth surfaces, 35 µm dry film thickness, 11 m²/L |
| Flash Point | 18 °C (closed) |
Blast-clean to Sa 2½ 'near-white' or phosphate treatment.
Spray (air spray or airless spray).
Thinner No. 037U, 0278(HD). Do not thin the individual components; thin the mixture.
During application, an ambient temperature of 5–35 °C and relative humidity below 80% are most suitable.
Dry film thickness 30–40 µm.
At 20 °C: touch dry 10 min; hard dry 4 h; fully dry 7 days.
KORETHANE ENAMEL, or per the coating specification.
Approx. 8 h at 20 °C.
Minimum 4 h at 20 °C.
| Shelf life | 12 months |
|---|---|
| Storage | Store in a cool, dry, well-ventilated place away from direct sunlight and ignition sources, at normal temperature (5–35 °C). |
| Packaging Specifications | 16 L pack (base : hardener = 12.8 L : 3.2 L) |
Ensure adequate ventilation; never inhale solvent vapour for long; avoid skin and eye contact. Issue date: 2005-11-01.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
