ECOSIL SUPERB TOPCOAT WT3500 waterborne acrylic topcoat is a waterborne coating used as a topcoat. Parameters on this page: volume solids approx. 40%, dry film thickness 40~60 µm (per coat), theoretical spreading rate 4.0 m²/L/100 µm. Comparable products from the same brand: ECOSIL SUPERB TOPCOAT WT3500 waterborne acrylic topcoat, ECOSIL SUPERB TOPCOAT WT3600 waterborne epoxy topcoat, ECOSIL SUPERB PRIMER WP3400 waterborne epoxy primer.
Parameter source: KCC manufacturer's Technical Data Sheet (TDS) "ECOSIL SUPERB TOPCOAT WT3500 Waterborne Acrylic Topcoat"; spreading rate and other values are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | Approx. 40% |
|---|---|
| Dry Film Thickness | 40–60 µm (per coat) |
| Theoretical Spreading Rate | 4.0 m²/L/100 µm |
| VOC | — |
| Density / Specific Gravity | 1.1–1.3 kg/L |
| Number of Components | One-component |
| Colour / Appearance | Semi-flat, colours available to order |
| Drying Time | Touch dry: 10°C 1 h, 20°C 30 min, 30°C 20 min; hard dry: 36… |
WT3500 is a waterborne silicone-modified acrylic coating with excellent weather resistance, colour and gloss retention and anti-soiling performance. It cures to form a hard, highly rust-resistant coating. WT3500 is a VOC-compliant product with good adhesion, flexibility and impact resistance.
Used as a topcoat for newly manufactured or refurbished containers, with a suitable primer, for steel surfaces in medium-corrosion environments.
| Appearance and colour | Semi-flat, colours available to order |
|---|---|
| Volume Solids | Approx. 40% |
| Theoretical Spreading Rate | 8.0 m²/L (smooth surface, dry film thickness 50 µm) |
| density | Approx. 1.1–1.3 kg/L |
| Flash Point | Non-flammable |
| Drying Time | Touch dry: 10°C 1 h, 20°C 30 min, 30°C 20 min; hard dry: 36 h / 12 h / 9 h (data for guidance only). |
Before application, remove all grease, dust and other contaminants from the surface to be coated using solvent or clean water.
According to the specification.
Normal temperature 10–40 °C, preferably 15–30 °C; normal relative humidity 20–80%, preferably 40–60%. The surface temperature shall be at least 5 °C (9 °F) above the dew point to avoid condensation.
Clean potable water. No dilution for airless spray; maximum dilution 15% by volume (maximum 25% recommended for air spray).
Apply by brush or spray (air or airless). Airless spray: tip size 0.013"~0.015"; nozzle pressure 2,100~2,400 psi (143~164 atm); fan 30°~80°. Brush application is for small areas only.
Recommended dry film per coat 40–60 µm. The dry film thickness may vary according to the application and area.
| Shelf life | 12 months |
|---|---|
| Notes | Clean equipment with clean water immediately after use; protect the eyes and skin; store indoors at 5–30 °C with frost protection. |
Issue date: October 2015.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
