5904D SEA GRANDPRIX 880 HS Tin-free Self-polishing Antifouling Paint is an antifouling coating. SEA GRANDPRIX 880 HS is a hydrolysing tin-free self-polishing antifouling paint that can extend dry-docking intervals up to 90 months. Parameters on this page: volume solids 65 ± 2% (by volume) (ISO 3233); dry film thickness 75–160 µm; theoretical spreading rate 0.115–0.246 L/m². Comparable products from the same brand: 4010B SEATENDER 7 Tin-free Self-polishing Antifouling Paint, 5843A SEAFLO NEO SL Tin-free Self-polishing Antifouling Paint, 5843H SEAFLO NEO SL Z Tin-free Self-polishing Antifouling Paint.
Source: CMP original technical data sheet (TDS) '5904D SEA GRANDPRIX 880 HS Tin-free Self-polishing Antifouling Paint'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 65 ± 2% (by volume) (ISO 3233) |
|---|---|
| Dry Film Thickness | 75–160 µm |
| Theoretical Spreading Rate | 0.115-0.246 L/m2 |
| VOC | 348 g/L (Method 24) |
| Density / Specific Gravity | 1.96g/ml (ISO: 2811) |
| Number of Components | One-component |
| Flash Point | 23.0°C |
| Thinner | CR/ACRI THINNER A |
| Colour / Appearance | Brown, light brown |
SEA GRANDPRIX 880 HS is a hydrolysing tin-free self-polishing antifouling paint that can extend dry-docking intervals up to 90 months.
| Type | Tin-free self-polishing antifouling paint; low friction coefficient 6.9%, low VOC 348 g/L (high volume solids 65%) |
|---|---|
| Use | May be used as an antifouling for the underwater hull of ocean-going vessels, with up to 90 months between dry-dockings. |
| Colour | Brown, light brown |
|---|---|
| Flash Point | 23.0°C |
| Density | 1.96g/ml (ISO: 2811) |
| Volume Solids | 65 ± 2% (by volume) (ISO 3233) |
| Volatile organic compound content | 348 g/L (Method 24) |
| Theoretical spreading rate | 0.115-0.246 L/m2 |
| Thickness | WFT 115–246 µm, DFT 75–160 µm |
(dry film 100 µm)
| Temperature | -5 °C | 0 °C | 5 °C | 10 °C | 20 °C | 30 °C | |
| Drying Time | Surface Dry | 8 h | 5 h | 3 h | 2 h | 1 h | 30 min |
| Hard Dry | 22 h | 16 h | 12 h | 8 h | 5 h | 4 h | |
| Recoat interval | At least | 22 h | 16 h | 12 h | 8 h | 5 h | 4 h |
| At most | / | / | / | ||||
| Dry-to-launch time | Fastest | 48 h | 36 h | 24 h | 18 h | 12 h | 10 h |
| Application method | Airless spray, brush, roller |
|---|---|
| Weather: temperature | Minimum -5 °C |
| Humidity | Maximum 85% RH; steel temperature at least 3 °C above the dew point |
| Airless spray: viscosity | 90 s (Ford cup No. 4) |
| Nozzle | (Graco)621-735 |
| Paint output pressure | 11.7-14.7MPa |
| Spray gun speed | 60–80 cm/s |
| Thinner | CR/ACRI THINNER A |
| Thinning | 0–7% by volume |
| Preceding coat | BANNOH 1500 N, BANNOH 1500 S, BANNOH 500 N, BANNOH 500 R, BANNOH 500 S, SILVAX SQ-K, CMP AC,BANNOH 1500 N Z, BANNOH 1500 S Z |
| Subsequent coat | - |
| Packaging | One-component |
Note: 1. Expected antifouling performance during berthing: consider the ship's operating conditions and the berthing environment, such as marine growth activity, pollution level and water temperature at the berth. For details, consult the local CMP office.
2. Maintain ventilation from application until full cure to remove residual solvent and promote curing.
3. Stir with a mixer until homogeneous, then add the appropriate thinner and mix.
4. Below 10 °C, additional thinner may be required to obtain a suitable application viscosity.
5. Excessive thinning, however, reduces sag resistance and film performance.
6. Slight colour change may occur after immersion and outdoor exposure.
7. Density, solids content and VOC are calculated values without added thinner. They vary with colour, production process and local regulations.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item numbers of 5904D SEA GRANDPRIX 880 HS Tin-free Self-polishing Antifouling Paint are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| 5904D SEA GRANDPRIX 880 HS Light Brown | — | 20 L |
| 5904D SEA GRANDPRIX 880 HS Brown | — | 20 L |
This model has a total of2item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
