5895 MARINE STAR A Tin-Free Self-Polishing Antifouling Paint belongs to antifouling paints. MARINE STAR A No .5895MARINE STAR A is a tin-free self-polishing antifouling paint based on a special resin with high hydrolysis activity. Parameters on this page: volume solids 55 ± 2% (volume) (ISO: 3233), DFT 100 µm, theoretical spreading rate 0.182 L/m². Comparable products from the same brand: 4010B SEATENDER 7 tin-free self-polishing antifouling paint, 5843A SEAFLO NEO SL tin-free self-polishing antifouling paint, 5843H SEAFLO NEO SL Z tin-free self-polishing antifouling paint.
Source of parameters: CMP original technical data sheet (TDS) '5895 MARINE STAR A Tin-Free Self-Polishing Antifouling Paint'; values such as spreading rate are converted from TDS parameters and are for model selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 55 ± 2% (by volume) (ISO 3233) |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 0.182 L/m2 |
| VOC | 446 g/L (Method 24) |
| Density / Specific Gravity | 1.40g/ml (ISO: 2811) |
| Number of Components | One-component |
| Flash Point | 22°C |
| Thinner | CR/ACRI THINNER A |
| Colour / Appearance | Red, blue, red-brown, white, black |
MARINE STAR A is a tin-free self-polishing antifouling paint based on a special resin with high hydrolysis activity.
The highly active resin ensures the most effective release of biocide, giving good antifouling performance.
Surface activity is controlled by hydrolysis, and the applied film thickness ensures long-term self-polishing protection.
| Type | Tin-free self-polishing antifouling |
|---|---|
| Use | Antifouling paint for aluminium boat bottoms. |
| Colour | Red, blue, red-brown, white, black |
|---|---|
| Flash Point | 22°C |
| Density | 1.40g/ml (ISO: 2811) |
| Volume Solids | 55 ± 2% (by volume) (ISO 3233) |
| Volatile organic compound content | 446 g/L (Method 24) |
| Theoretical spreading rate | 0.182 L/m2 |
| Thickness | WFT 182 µm, DFT 100 µm |
(dry film 100 µm)
| Temperature | 0 °C | 5 °C | 10 °C | 20 °C | 30 °C | |
| Drying Time | Surface Dry | 3 h | 2 h | 1 h | 30 min | |
| Hard Dry | 12 h | 8 h | 5 h | 4 h | ||
| Recoat interval | At least | 12 h | 8 h | 5 h | 4 h | |
| At most | / | / | / | |||
| Dry-to-launch time | Fastest | 24 h | 18 h | 12 h | 10 h |
| Application method | Airless spray, brush, roller |
|---|---|
| Weather: temperature | Minimum 0 °C |
| Humidity | Maximum 85% RH; steel temperature at least 3 °C above the dew point |
| Airless spray: viscosity | 90 s (Ford cup No. 4) |
| Nozzle | (Graco)619-625 |
| Paint output pressure | 11.7-14.7MPa |
| Spray gun speed | 60–80 cm/s |
| Thinner | CR/ACRI THINNER A |
| Thinning | 0–7% by volume |
| Preceding coat | VINYL AC-HB, RAVAX AC, RAVAX AC-P, HIPER AC and others. |
| Subsequent coat | - |
| Packaging | One-component |
Note: 1. If a ship berths continuously for two weeks or longer, especially in areas at risk of heavy marine growth, the bottom antifouling areas may be fouled by marine organisms.
2 Density, volume solids and volatile organic content are theoretical calculated values excluding thinner. The values vary with colour, production process and local regulations.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
