3TREES FFX101 Polyurethane Thinner is an auxiliary material. Achieves ideal brushing and spraying performance during application.
Source: 3TREES original technical data sheet (TDS) "3TREES FFX101 Polyurethane Thinner"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | 800 g/L |
| Density / Specific Gravity | Approx. 0.9 kg/L |
| Number of Components | — |
| Flash Point | 26°C |
| Thinner | 15 kg per drum |
| Colour / Appearance | Clear |
This product is suitable for thinning 3TREES solvent-borne polyurethane products to facilitate application. If 3TREES polyurethane paints are correctly mixed or stirred and suitable application equipment is selected, thinning is generally not required and they can be sprayed directly. However, in certain special cases, if sealing of the substrate or preceding coat is desired, or the paint thickens due to temperature, thinner may be added at the dosage given in the product datasheet, giving a uniform film and convenient application.
| As a general rule, | Thinner should be added as little as possible, because excessive thinner affects the post-application quality and poses a VOC control risk. In some cases, some conventional solvents may be substituted; these substitute products are outside our product quality control, and we reserve the right to raise objections to negative results caused thereby. |
|---|
for ideal brushing and spraying properties.
| Colour: | Clear |
|---|---|
| Gloss: | N/A |
| Volume solids: | N/A |
| Specific gravity: | Approx. 0.9 kg/L |
| Flash point: | 26°C |
| VOC content: | 800 g/L |
| Shelf life: | Dry and cool, away from ignition sources, unlimited shelf life |
See the individual polyurethane product datasheets.
1. This product may be used to clean application tools used for polyurethane products.
2. If required, tools used for 3TREES polyurethane paints may be cleaned with it; do not use it to clean application tools for non-polyurethane paints, to avoid affecting subsequent application of other paints. If this occurs, contact 3TREES technical service personnel.
| FFX101 Polyurethane Thinner: | 15 kg per drum |
|---|
For the coating and its recommended thinners, see the safety sheets and the relevant Material Safety Data Sheet.
This is a solvent-borne coating/thinner; appropriate protective equipment shall be used to avoid inhaling spray mist and solvent.
In addition, avoid skin and eye contact with wet paint or thinner.
In all cases, SKSHU (3TREES) shall not be liable for any indirect, special, incidental or consequential loss of any kind arising from or in connection with the use of this product (whether based on negligence, strict liability or tort).
The information in this product data sheet is based on laboratory tests we believe to be reliable, and is provided for guidance only. SKSHU (3TREES) may revise this information at any time as experience accumulates and product development progresses.
All recommendations and advice concerning the use of this product, whether in technical documents, in response to an enquiry or otherwise, are given to the best of our knowledge and are believed to be reliable. Our products and related information are provided for industrial users possessing the necessary knowledge and practical skills, and it is the end user's responsibility to determine whether the product is suitable for the specific use. The buyer, having performed such evaluation, proceeds entirely at its own risk.
The quality and condition of the substrate on site, and the many other factors affecting product use and application, are beyond SKSHU (3TREES)'s control. SKSHU (3TREES) accepts no liability for coating quality problems caused by application environment, application process, surface preparation or personnel operation (unless otherwise provided in a written agreement).
To avoid misuse, confirm with our sales staff that the product data sheet in hand is the latest version.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The in-plant item numbers of 3TREES FFX101 Polyurethane Thinner are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| FFX101 | — | 15 KG |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
