ZIEP217 Water-borne Epoxy Zinc-rich Primer belongs to the zinc-rich primer and water-borne coating system. Used for the anti-corrosion protection of steel structure surfaces under mild to severe atmospheric corrosive environments, widely applied in numerous industries such as ships, containers, port machinery, petrochemicals, pipelines, metallurgy and power. With water as the dispersion medium, non-flammable and non-explosive, dilutable with water and coating tools cleanable with water, no pollution during application, safe and convenient in transport and storage. Parameters on this page: dry film thickness 75 µm, theoretical spreading rate 2.80 m²/kg, number of components two-component.
Parameter source: OSAKA original technical data sheet (TDS) “ZIEP217 Water-borne Epoxy Zinc-rich Primer (two-component)”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 60% |
|---|---|
| Dry Film Thickness | 75 µm |
| Theoretical Spreading Rate | 2.80 m²/kg |
| VOC | — |
| Density / Specific Gravity | 2.85 kg/L |
| Number of Components | Two-component |
| Thinner | Clean fresh water |
| Mixing Ratio | Component A : Component B = 25:5 (by weight) |
| Colour / Appearance | Grey |
A water-borne two-component epoxy zinc-rich primer using lamellar zinc powder as anti-corrosive pigment, with zinc content in the dry film greater than 80%. The coating film is tough with strong mechanical properties, providing good cathodic protection at locally damaged areas, and good water resistance, oil resistance and salt spray resistance. Water is used as the dispersion medium; non-flammable and non-explosive; water can be used for dilution and cleaning of application tools; application is pollution-free; transport and storage are safe and convenient.
For corrosion protection of steel structures in mild to severe atmospheric corrosion environments, widely used in shipbuilding, containers, port machinery, petrochemical, pipeline, metallurgy and power industries.
| Colour | Grey |
|---|---|
| Volume Solids | 60% |
| Dry Film Thickness | 75 µm |
| Theoretical Spreading Rate | 2.80 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Mixing Ratio | Component A : Component B = 25:5 (by weight) |
|---|---|
| Airless spray | Recommended: nozzle orifice: 0.43–0.53 mm; spray pressure: ≥15.5 MPa |
| Conventional spray | Recommended: nozzle orifice 1.3–1.5 mm; nozzle pressure 0.3–0.4 MPa |
| Brush | Recommended for touch-up or small-area application. Take care to achieve the specified dry film thickness. |
| Roller application | Recommended for small-area application. Take care to achieve the specified dry film thickness. |
| Thinner | Clean fresh water |
| Paint equipment cleaner | Clean fresh water |
| Pot life | 23 °C: 4 h |
| Drying Time | |||
| Substrate Temperature | Touch dry (min) | Hard dry (h) | Minimum recoat interval (h) |
| 23°C | 30 | 12 | 6 |
Note: ventilation, temperature, relative humidity and film thickness all affect drying and curing times. The data above are measured under well-ventilated conditions with relative humidity <75%.
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | Component A: 25 kg in a 20 L container; Component B: 5 kg in a 5 L container |
| density | 2.85 kg/L |
All surfaces to be coated shall be kept clean, dry and free from contamination. Prior to application, surface assessment and preparation shall be carried out in accordance with ISO 8504:2000. Oil and grease shall be removed by solvent cleaning in accordance with SSPC-SP1. Steel surfaces shall be prepared by abrasive blast cleaning to Sa2.5 or by power tool cleaning to St3.
Subsequent coat: epoxy, polyurethane, acrylic and similar coatings.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item number of ZIEP217 Water-borne Epoxy Zinc-rich Primer (two-component) is as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| ZIEP217 Grey | — | 28 KG |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
