TETZSOL 400 Silicone Heat-resistant Aluminium Coating

Browse Similar Models by CategoryThis model belongs to: Heat-resistant, Silicone

TETZSOL 400 is a one-component silicone acrylic aluminium heat-resistant paint. Heat resistance up to 400 °C; product description: fast drying, excellent workability; excellent heat resistance and thermal shock resistance, good adhesion to substrate and between coats.

Product use TETZSOL 400 can be used for long-term protective coating of hot pipelines, exhaust ducts, chimneys and other hot surfaces with operating temperature above 100 °C and below 400 °C. Used in combination with Nippon inorganic zinc products, it provides excellent heat resistance and anti-corrosion performance.

Surface preparation Oil and grease cleaning shall refer to standard SSPC-SP1 solvent cleaning.

Blasting Blast to Sa 2½ (ISO 8501-1:2007) or SSPC-SP6 (or SSPC-SP10 for better results). If the blasted surface has oxidized before coating, it must be re-treated to meet the specified standard requirements. Surface defects exposed after blasting shall be treated by grinding, filling or other appropriate methods. Recommended surface roughness 30–60 µm. Repair of damaged areas Damaged areas must be blasted to Sa 2½ (ISO 8501-1:2007). If blasting is not possible, mechanical grinding to St3 (ISO 8501-1:2007) is permitted. After surface preparation, repair the primer before applying TETZSOL 400.

TETZSOL 400 must be applied on the corresponding anti-corrosion coating according to the recommended system. The application surface must be dry, free from contamination, and application must be within the specified overcoating interval (refer to the relevant product data sheet).

Other surfaces: if this coating is to be applied to other surfaces, consult the local Nippon Paint company for further information.

Application conditions: avoid application when ambient temperature is below 5 °C or above 45 °C, or air humidity is above 85%; steel temperature must be at least 3 °C above dew point and not higher than 50 °C.

Note: After the film dries naturally, aluminium powder may come off on hands; this is normal and disappears as temperature rises.

Note: after application, avoid rain exposure; if conditions permit, after application heat uniformly at a rate of 10 °C/min to above 100 °C and maintain for more than 1 h for better results.

Application methods Roller/brush: suitable for stripe coating and small-area application;

Air spray/airless spray: recommended for large-area application;

Regardless of the method used, the specified dry film thickness must be achieved.

Note: *At hard dry, the film is not fully cured. To achieve ideal working condition, complete the full curing process; the film shall be effectively protected before application to hot surfaces;

The data above are for guidance only. Actual recoat and drying times may be shorter or longer depending on film thickness, ventilation, humidity, the underlying coating system, and prior hand or mechanical preparation conditions.

The following primers/topcoats are recommended for use with TETZSOL 400 silicone aluminium heat-resistant paint:

Recommended system

Primer

• TETZSOL 400 Silicone Aluminium Heat-resistant Paint
• HI-CATE 1715 Inorganic Zinc-rich Primer Topcoat
• For TETZSOL 400 silicone aluminium heat-resistant paint, select the coating system according to different requirements; refer to the product manual or contact Nippon Paint for professional guidance.

Packaging Kit Weight Packaging Size 16 kg 16 kg 18 L

Storage shall comply with national regulations. The product shall be stored in closed containers in a dry, cool and well-ventilated warehouse, away from heat and ignition sources. Excessive temperature will shorten shelf life and may cause the paint to gel in the can. The above is the minimum shelf life; after exceeding it, testing is required to determine whether it can continue to be used.

• This product is for professional use only. Before use, refer to the packaging and the safety data sheet (SDS)

for the safety information.

• Use in a well-ventilated area. Avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner or soap and water.
• In case of eye contact, rinse immediately with plenty of clean water and seek medical examination.
• During application, open flames, welding and smoking are not permitted, and good ventilation must be maintained.
• If in doubt about the use of this product, consult Nippon Paint.

The above information is based on laboratory tests and application experience. However, since actual use is affected by many unforeseeable and uncontrollable factors, we assume no application liability. Please read this data sheet carefully and contact Nippon Paint before using the product to confirm whether this data sheet is the latest version.

We reserve the right to make changes without prior notice.

Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.