NIPPON O-MARINE PRIMER alkyd primer is an alkyd coating used as a primer. Used as an anti-corrosive primer on weather decks and inside and outside superstructures. A high-build primer made from alkyd resin and anti-corrosive pigments, with excellent adhesion, anti-corrosive properties and moisture resistance, plus good application properties; can be applied as a high-build coat. Parameters on this page: volume solids 49 ± 2%, theoretical spreading rate 7.00 m²/L (70 µm DFT).
Source: NIPPON MARINE original technical data sheet (TDS) "NIPPON O-MARINE PRIMER Alkyd Primer"; values such as spreading rate are converted from the TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 49 ± 2% |
|---|---|
| Dry Film Thickness | 30µm ~ 80µm |
| Theoretical Spreading Rate | 7.00 m²/L (dry film 70 µm) |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 41°C |
| Thinner | THINNER 100 (0–5%, by weight) |
| Colour / Appearance | White (H) - EAH095 Red iron oxide (H) - EAH445 Grey (H)… |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
High-build primer based on alkyd resin and anti-corrosive pigments, with excellent adhesion, anti-corrosive and moisture resistance properties and good application properties; can be applied as a high-build coating.
Used as an anti-corrosive primer for exposed decks and interior and exterior of superstructures of ships
| Type | Alkyd (high-build) |
|---|---|
| Colour | White (H) - EAH095 Iron Red (H) - EAH445 Grey (H) - EAH060 |
| Gloss | Flat |
| Solids content (by volume) | 49 ± 2% (ISO3233:1998) |
| Recommended film thickness | DFT: 30–80 µm |
| Wet film | 61µm ~ 163µm |
| Theoretical Spreading Rate | 7.00 m²/L (70 µm DFT) |
| Thinner | THINNER 100 (0–5%, by weight) |
| 5°C | 20°C | 30°C | ||
| Drying Time | Surface Dry | 1 h | 30 min | 20 min |
| Hard Dry | 24 h | 7 h | 5 h | |
| Recoat interval | Minimum | 24 h | 16 h | 10 h |
| (self-recoat) | Maximum | ----- | ----- |
| Flash Point | 41°C |
|---|
Airless spray tip size: 0.43–0.53 mm
| Spray fan angle | 45 ~ 55° |
|---|---|
| Output pressure | 80 ~ 100 kg/㎝2 |
| Brush/roller | For small-area repair only |
Power tool cleaning to St2.0
| Packaging Specifications | 20 L, 5 L |
|---|
Take the necessary protective measures to avoid skin and eye contact (e.g. gloves, safety glasses, face
1) The content of this data sheet may be revised at any time as experience grows and the product develops. 2) Store the product in a paint warehouse.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
