ECOLOFLEX SPC 200 Tin-free Self-polishing Antifouling 200 is an antifouling. 200 hydrolysable tin-free self-polishing antifouling made from acrylic silyl polymer resin produced by the company's proprietary technology, designed for general ocean-going vessels, providing resistance to seaweed and macrofouling. Parameters on this page: number of components one.
Source: nippon-marin original technical data sheet (TDS) "ECOLOFLEX SPC 200 (K) Tin-free Self-polishing Antifouling 200"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 62 ± 2% |
|---|---|
| Dry Film Thickness | 65-150 µm |
| Theoretical Spreading Rate | 6.21 m²/L (100 µm) |
| VOC | 375 g/L |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Flash Point | 28°C |
| Thinner | THINNER 300 |
| Colour / Appearance | Brown K, light brown K |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Publication date | July 2024 |
|---|---|
| ECOLOFLEX SPC | 200 hydrolysable tin-free self-polishing antifouling made from acrylic silyl polymer resin produced by the company's proprietary technology, designed for general ocean-going vessels, providing resistance to seaweed and macrofouling. The extensive track record of the ECOLOFLEX SPC series proves that this product has excellent and long-term stable antifouling performance. This product can provide up to 60 months of antifouling protection. |
Product Data
General ocean-going vessels
| Type | Cuprous oxide / special acrylic silyl copolymer (tin-free / self-polishing / hydrolysable / high solids) |
|---|---|
| Colour | Brown K, light brown K |
| Gloss | Semi-gloss |
| Volume Solids | 62 ± 2% (ISO3233:1998) |
| Dry Film Thickness | 65 ~ 150 µm |
| Wet Film Thickness | 105 ~ 242 µm |
| Theoretical Spreading Rate | 6.21 m²/ L (100 µm) |
| Drying Time | Surface Dry | 1 h (5 °C) | Hard Dry | 3 h (5 °C) |
| 40 min (20 °C) | 1 h (20 °C) | |||
| 30 min (30 °C) | 40 min (30 °C) | |||
| Recoat interval | Minimum | 6 h (5 °C) | Maximum | -- (5°C) |
| (self-recoat) | 4 h (20 °C) | -- (20°C) | ||
| 3 h (30 °C) | -- (30°C) | |||
| Interval before Immersion | Minimum | 18 h (5 °C) | ||
| (100µm) | 12 h (20 °C) |
| 10 h | (30 °C) ※ Refer to |
|---|---|
| VOC | 375 g/L (GB/T 23985-2009) |
All surfaces to be coated shall be clean, dry and free from contaminants, loose material or other defects.
High-pressure fresh water washing to remove all grease, soluble salts, rust or foreign matter.
| Thinner | THINNER 300 |
|---|
Airless Spray
| Gun tip size | 0.69 ~ 0.84 mm |
|---|---|
| Spray fan angle | 62° ~ 75° |
| Output pressure | Greater than 150 kg/cm² Brush/Roller For small-area repair only |
| Packaging Specifications | Single component: 20 L; packaging may vary by origin |
| Flash Point | 28°C(GB/T 5208-2008) |
Take the necessary protective measures to avoid skin and eye contact (e.g. gloves, safety glasses, face shield, barrier cream).
Ensure adequate ventilation during application and drying to keep solvent vapour concentrations within safe limits.
Before use, refer to the health and safety information in the Safety Data Sheet (SDS) for this product.
Precautions: 1. The content of this product data sheet may be revised at any time as our experience grows and the product is further developed.
| 2. Before and after spraying, clean with THINNER | 300 to clean the spray equipment, lines and guns. |
|---|
3. If this product is mixed with other antifouling paints or any other chemicals, the "Tin-free Antifouling Paint Declaration" cannot be issued.
4. The interval before immersion is affected by environmental conditions, ventilation, film thickness and number of coats; contact us for actual application.
5. For product selection, consult local Nippon Paint Marine Coatings personnel.
6. Packaging and can quantities may vary due to local regulations.
7. The product shall be stored in a paint warehouse.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
