SILISAFE ZINC SW-30 Waterborne Inorganic Zinc Silicate Shop Primer SW-30 is a zinc-rich primer, in the waterborne coating system. Compatible with blasted steel surfaces. A self-drying waterborne inorganic shop primer based on waterborne silicate. Parameters on this page: volume solids 55 ± 2%, dry film thickness 15-25 µm/coat, theoretical spreading rate 3.7 m²/L. Comparable models from the same brand: SD ZINC 1000HA inorganic zinc silicate shop primer 1000HA, SILISAFE ZINC 80 waterborne inorganic zinc-rich primer 80, AMEINCOAT ZINC PRIMER.
Parameter source: KANSAI original technical data sheet (TDS) for SILISAFE ZINC SW-30 Waterborne Inorganic Zinc Silicate Shop Primer SW-30; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 55 ± 2% |
|---|---|
| Dry Film Thickness | 15–25 µm per coat |
| Theoretical Spreading Rate | 3.7 m²/L / 15 µm |
| VOC | 10 g/L |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | ≥60°C |
| Thinner | Water |
| Mixing Ratio | Liquid/powder = 1/2.3 (by weight) |
| SILISAFE ZINC SW-30 | Waterborne Inorganic Zinc Silicate Shop Primer SW-30 |
|---|
A self-curing water-bone inorganic zinc shop primer based on water-bone silicate.
Compatible with blasted steel surfaces
Excellent high speed welding performance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 55±2% |
| VOC | 10 g/L |
| Volatile organic compound content | 10 g/L |
| Flash Point | ≥60°C |
| Film thickness | Dry : 15-25 microns/coat Wet : 27-45microns/coat |
| Applied film thickness | Dry film: 15-25 µm/coat; wet film: 27-45 µm/coat |
| Theoretical Coverage | 3.7m2/Ltr/15 microns |
| Theoretical Spreading Rate | 3.7 m²/L / 15 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Shelf Life | Liquld : 6months; powder:12 months |
|---|---|
| Shelf life: Shelf Temperature | Liquid: 6 months; powder: 12 months |
| Storage temperature | 5°C-40°C |
| Application Temperature | 10°C-40°C |
|---|---|
| Mixing | Add powder to liquid first, then mix thoroughly with power agitator |
| Mixing | Add the powder to the liquid and stir thoroughly with a power tool |
| Mixing Ratio | Liquid/Powder=1/2.3(by weight) |
| Mixing ratio | Liquid/powder = 1/2.3 (by weight) |
| Pot Life | 20°C | 30°C | |
| Pot life | 1.2hrs | 1.0hrs | |
| 4hrs | 3hrs | (5% dilute with water) |
| Application Methods | Airless spray, air spray |
|---|---|
| Application Methods | Airless spray, air spray |
Airless spray
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥6Mpa |
| Thinning ratio | 0–10% by weight |
| Thinner | Water |
|---|---|
| Thinner | Water |
| Drying time & | Temperature | 20°C | 30°C |
| Overcoating interval | Surface dry | 4mins | 3mins |
| Drying time & recoat interval | Touch dry | 5mins | 4mins |
| Min. interval | Minimum recoat interval | 72hrs | |
| Max. interval | Maximum recoat interval | 7days | |
| Applied Substrates | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Waterbone epoxy coating, solvent epoxy coating or according to the coating system of Cosco |
| Suitable for overcoating | Kansai. |
Waterborne epoxy, solvent-borne epoxy, or refer to our coating system
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2020/05 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
