SD ZINC 2000 Inorganic Zinc-rich Primer 2000 is a zinc-rich primer of the inorganic zinc silicate coating family. Suitable for pretreated steel and inorganic zinc-rich shop-primed surfaces. An air-drying inorganic zinc-rich coating based on alkyl silicate. Specifications on this page: volume solids 60% ± 2%, DFT 60-75 µm per coat, theoretical spreading rate 8.0 m²/L. Comparable products of the same brand and type: SD ZINC 1000HA Inorganic Zinc Silicate Shop Primer 1000HA, SD ZINC PRIMER 1000HA Inorganic Zinc Silicate Shop Primer 1000HA, SILIFEND ZINC AS-50 Air-drying Inorganic Zinc-rich Coating.
Data source: KANSAI original Technical Data Sheet (TDS), "SD ZINC 2000 Inorganic Zinc-rich Primer 2000"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 60% ± 2% |
|---|---|
| Dry Film Thickness | 60–75 µm per coat |
| Theoretical Spreading Rate | 8.0 m²/L /75 µm |
| VOC | 402 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | Above 19 °C |
| Thinner | Dedicated thinner |
| Mixing Ratio | Liquid : powder = 20/86 (by weight) |
| SD ZINC PRIMER 2000 | Inorganic Zinc-rich Primer 2000 |
|---|
A self-curing inorganic zinc coating based on alkyl silicate binder
Compatible with blasted steel surfaces and inorganic zinc shop-primed surfaces
Complies with ISO 12944-5, SSPC PAINT 20, HG/T 3668-2009
Remarkable corrosion resistance
| Color | Grey |
|---|---|
| Colour | Grey |
| Volume Solids | 60%±2% |
| VOC | 402g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 402 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 19°C |
| Flash Point | Above 19 °C |
| Film thickness | Dry : 60-75 microns/coat Wet : 100-125microns/coat |
| Applied film thickness | DFT: 60–75 µm per coat; WFT: 100–125 µm per coat |
| Theoretical Coverage | 8.0m2/L/75microns |
| Theoretical Spreading Rate | 8.0 m²/L/75 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Add powder to liquid first, then mix thoroughly with power agitator |
| Mixing | Add the powder to the liquid and stir thoroughly with a power tool |
| Mixing Ratio | Liquid/Powder=20/86(by weight) |
| Mixing ratio | Liquid : powder = 20/86 (by weight) |
| Pot Life | 5°C | 10°C | 20°C | 30°C |
| Application Methods | 8hrs | 7hrs | 6hrs | 5hrs |
| Application Methods | Airless spray, air spray |
|---|
Airless spray, air spray
Airless spray
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
| Thinner | SD ZINC 2000PRIMER Thinner |
|---|---|
| Thinner | Dedicated thinner |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 60mins | 30mins | |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 6hrs | 3hrs | 1hr |
| Min. interval | Minimum recoat interval | 48hrs | |||
| Max. interval | Maximum recoat interval | ||||
| Applied Substrates | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Epomarine Sealer Primer or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Epoxy sealer or refer to our recommended coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 6 months from date of production (25°C) |
|---|---|
| Shelf life | 6 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2018/04 |
|---|
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
