RETAN 6000 VARNISH Polyurethane Varnish 6000 is a polyurethane paint, used as a topcoat. A high gloss polyurethane varnish & INTENDED USES. Product description: a high-gloss polyurethane varnish. Excellent durability in chemicals and oil; good applicability; provides hardeners, abrasion resistance; drying fast. Flash point: APPLICATION DATA. Pot life above 17 °C. Parameters on this page: volume solids 51 ± 2%, theoretical spreading rate 0.039 kg/m².
Data source: KANSAI original Technical Data Sheet (TDS), "RETAN 6000 VARNISH Polyurethane Varnish 6000"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 51 ± 2% |
|---|---|
| Dry Film Thickness | 20 µm per coat |
| Theoretical Spreading Rate | 0.039 kg/m2 |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | Polyurethane thinner |
| Mixing Ratio | Base : curing agent = 17:3 (by weight) |
| Colour / Appearance | Bright |
| Retan 6000 Varnish | Polyurethane Clear Coat 6000 |
|---|
A high gloss polyurethane varnish
| Intended Uses | A high-gloss polyurethane varnish. |
|---|
Excellent durability in chemicals and oil
Good applicability
Provides hardeners, abrasion resistance
Drying fast
| Basic data: Colour(s) | Clear |
|---|---|
| Colour | transparent |
| Mixing ratio | Base/Hardener=17/3 (by wt.) |
| Mixing ratio | Base : curing agent = 17:3 (by weight) |
| Volume Solids | 51±2% |
| Film thickness | Dry : 20 microns/coat Wet : 39microns/coat |
| Applied film thickness | Dry film: 20 µm/coat. Wet film: 39 µm/coat. |
| Spreading rate | Theoretical: 0.039kg/ m2/20 microns |
| Spreading rate | Theoretical value: 0.039 kg/m²/20 µm. |
Practical: Various depending on surface conditions, environment, applications, etc.
| Shelf temperature | 5°C-40°C |
|---|---|
| Shelf life | 1 year |
| Shelf life | 1 year |
| Flash point | Greater than 17°C |
| Flash point. APPLICATION DATA. Pot life. | Above 17 °C |
| Temperature (°C) | -5 | 5 | 10 | 20 | 30 | |
| Pot life (hrs) | Pot life | 16 | 8 | 6 | 5 | 3 |
Airless spray, air spray, brush and roller
| Airless spray | Recommended | |
| Nozzle tip | Nozzle size | 0.017-0.023 |
| Fluid pressure | Output pressure | 100-150kg/cm² |
| Thinning | Thinning ratio | 0–10% by weight |
| Thinner | Retan Thinner |
|---|---|
| Thinner | Polyurethane thinner |
| Application temperature; Drying time & Overcoating interval | -10°C-40°C |
| Temperature (°C) | Temperature | -5 | 5 | 10 | 20 | 30 |
| Dry to touch (mins) | Touch dry | 6 | 3 | 2 | 1 | |
| Dry hard (hrs) | Semi-hard dry | 24 | 16 | 12 | 10 | 6 |
| Min. interval (hrs) | Minimum recoat interval | 30 | 24 | 20 | 16 | 12 |
| Max. interval (days) | Maximum recoat interval | - | ||||
| Coating system; Preceding coat | Epomarine EX 500, Super EX 21, Retan Undercoat, or according |
|---|---|
| Suitable for undercoating | to the coating systems of Kansai. |
Epomarine EX 500, Super EX 21, Retan Undercoat, or refer to our recommended coating system.
The information given on this sheet is to the best of our knowledge and
accurate at the time of printing. Since conditions of use are beyond the manufacture’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.
The information in this data sheet is the most complete and correct data currently available to us. As the conditions of product use are beyond our control, this information carries no warranty, and responsibility to the buyer is limited to the selection of the product. As the company's products and production processes continue to develop, all information herein is subject to our confirmation.
| Issued Date | 2024/04 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
