RABAMARINE AC Chlorinated Rubber Anticorrosive Paint is a chlorinated rubber coating used as a primer. Used on steel structure surfaces in immersed and non-immersed areas. A general-purpose chlorinated rubber anticorrosive primer composed of chlorinated rubber and anticorrosive pigments. Parameters on this page: volume solids 49 ± 2%, dry film thickness 40-70 µm/coat, theoretical spreading rate 7.0 m²/L. Comparable models from the same brand: AMEINCOAT ZINC PRIMER, EPOMARINE GX epoxy GX, EPOTECT GX anticorrosive primer.
Parameter source: KANSAI original technical data sheet (TDS) for RABAMARINE AC Chlorinated Rubber Anticorrosive Paint; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 49 ± 2% |
|---|---|
| Dry Film Thickness | 40-70 µm/coat |
| Theoretical Spreading Rate | 7.0 m²/L /70 µm |
| VOC | 500 g/L |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Flash Point | Above 23 °C |
| Thinner | Chlorinated rubber thinner |
| Mixing Ratio | Single-component coating |
| Rabamarine AC | Chlorinated rubber anticorrosive paint |
|---|
General anticorrosive primer based on chlorinated rubber with resisting pigments.
For steel structure in immersion and non immersion areas.
Excellent corrosion resistance
| Color | Oxide red and Silver |
|---|---|
| Colour | Iron red, silver |
| Volume Solids | 49±2% |
| VOC | 500g/L |
| Volatile organic compound content | 500 g/L |
| Flash Point | Greater than 23°C |
| Flash Point | Above 23 °C |
| Film thickness | Dry : 40-70 microns/coat Wet : 82-143microns/coat |
| Applied film thickness | Dry film: 40-70 µm/coat; wet film: 82-143 µm/coat |
| Theoretical Coverage | 7.0m2/L/70 microns |
| Theoretical Spreading Rate | 7.0 m²/L/70 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | -5°C-40°C |
|---|---|
| Mixing | Mix thoroughly with power agitator |
| Mixing | Stir thoroughly with a power tool |
| Mixing Ratio | One component coating |
| Mixing ratio | Single-component coating |
| Application Methods | Airless spray, air spray, brush and roller |
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–10% by weight |
Brush/Roller; Thinning ratio 0–10% by weight
| Thinner | Rabamarine Thinner |
|---|---|
| Thinner | Chlorinated rubber thinner |
| Drying time & | Temperature | -5°C | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 1.5hrs | 1hr | 30mins | 15mins |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 10hrs | 6hrs | 4hrs | 2hrs |
| Min. interval | Minimum recoat interval | 10hrs | 6hrs | 4hrs | 2hrs | |
| Max. interval | Maximum recoat interval |
| Applied substrates | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Typical topcoat | Rabamarine BTD, or according to the coating systems of Cosco Kansai. |
| Suitable for overcoating | Rabamarine BTD, or refer to our recommended system. |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2025/1 |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
