FERRODOR EPX-29 epoxy micaceous iron oxide coating EPX-29 is an epoxy coating used as an intermediate coat. For environments of new construction and maintenance: for new steel structure surfaces in moderate industrial corrosive environments, as a primer or intermediate coat. A two-component modified high-build epoxy MIO coating. Parameters on this page: volume solids 60 ± 2%, dry film thickness 75-200 µm per coat, theoretical spreading rate 0.304 kg/m²/125 µm. Comparable products from the same brand: EPOFEND MIO 30 epoxy micaceous iron oxide coating MIO-30, EPOTAINER EX EPOTAINER EX epoxy MIO high-build coating EX (M, EPOTECT EX epoxy MIO high-build coating EX.
Parameter source: KANSAI original Technical Data Sheet (TDS) \"FERRODOR EPX-29 Epoxy MIO Paint EPX-29\"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 60 ± 2% |
|---|---|
| Dry Film Thickness | 75–200 µm per coat |
| Theoretical Spreading Rate | 0.304 kg/m²/125 µm |
| VOC | 360 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 21 °C |
| Thinner | Epoxy Thinner #20 |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| FERRODOR EPX-29 | Epoxy MIO Paint EPX-29 |
|---|
A two pack modified high build epoxy coating with M.I.O.(Micaceous Iron Oxide)
As a primer or intermediate coat can be used in steel structure at industrial moderately corrosive
Complies with JT/T 722-2008, JT/T 733-2008
Good anti-corrosive performance
| Color | Grey and Oxide Red |
|---|---|
| Colour | Grey and iron red |
| Volume Solids | 60±2 % |
| VOC | 360g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| Volatile organic compound content | 360 g/L, compliant with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 21°C |
| Flash Point | Above 21 °C |
| Film thickness | Dry 75-200 microns/coat Wet : 125-333microns/coat |
| Applied film thickness | Dry film: 75–200 µm/coat Wet film: 125–333 µm/coat |
| Theoretical Coverage | 0.304Kg/m2/125 microns |
| Theoretical spreading rate | 0.304 kg/m²/125 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by mass) |
| Pot life | 5°C | 20°C | 30°C |
| Pot life | 16hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray , brush and roller |
|---|---|
| Application Methods 5 | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | 0.43mm-0.53mm |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 0–5% by volume |
Brush/Roller; Thinning ratio 5–10% by volume
| Thinner | Epomarine Thinner #20 |
|---|---|
| Thinner | Epoxy Thinner #20 |
| Drying time & | Temperature | 5°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 5hrs | 3hrs | 2hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 16hrs | 10hrs | 8hrs |
| Min. interval | Minimum recoat interval | 24hrs | 16hrs | 12hrs | |
| Max. interval | Maximum recoat interval |
| Typical undercoat | Bare steel, SD ZINC 500 etc. |
|---|---|
| Suitable for undercoating | Bare steel, epoxy zinc-rich coating 500, and similar |
| Typical topcoat | RETAN 6000, KANPE FLON HD or according to the coating system of Cosco Kansai. |
| Suitable for overcoating | Polyurethane Topcoat 6000, fluorocarbon topcoat, or refer to our coating system |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2011/6/27 |
|---|---|
| Issue date | 2011/6/27 |
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
