EPOTECT PC 100PH is an epoxy coating. A primer for use under insulation for pipes. Used on new facilities or as a maintenance primer, recommended for use under pipe insulation. A two-component high-solids high-build epoxy phenolic coating. Parameters on this page: volume solids 66 ± 2%, dry film thickness 100–150 µm/coat, theoretical spreading rate 0.230 kg/m²/100 µm. Comparable products from the same brand: TANKCARE AE-50 Phenolic Epoxy Antistatic Coating AE-50, TANKCARE PC-30 Phenolic Epoxy PC-30, TANKCARE PC-50 Phenolic Epoxy PC-50.
Source: KANSAI original technical data sheet (TDS) "EPOTECT PC 100PH"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 66 ± 2% |
|---|---|
| Dry Film Thickness | 100–150 µm per coat |
| Theoretical Spreading Rate | 0.230 kg/m² per 100 µm |
| VOC | 332 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | Above 20 °C |
| Thinner | Epoxy Thinner 20# |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| EPOTECT PC 100PH | Phenolic Epoxy PC 100PH |
|---|
A two pack high solids hi-build epoxy novolac coating.
As a primer can be used in new construction situations and as industrial maintenance
Complies with SH/T3022-2011
Good anti-corrosive performance
Excellent surface-tolerant properties
Suitable for high temperature(up to 200°C)
Good applicability
| Color | Grey and oxide red |
|---|---|
| Colour | Grey, iron red |
| Volume Solids | 66±2 % |
| VOC | 332g/L, accord with EU Dircrtive2004/42/EC, subcategory j |
| Volatile organic compound content | 332 g/L, complying with EU Solvent Emissions Directive 2004/42/EC, subcategory j |
| Flash Point | Greater than 20°C |
| Flash Point | Above 20 °C |
| Film thickness | Dry :100-150 microns/coat Wet : 150-227microns/coat |
| Applied film thickness | Dry film: 100–150 µm/coat; wet film: 150–227 µm/coat |
| Theoretical Coverage | 0.230kg/m²/100 microns |
| Theoretical Spreading Rate | 0.230 kg/m² per 100 µm |
Practical coverage depending on surface conditions, environment, applications, etc.
| Application Temperature | 5°C-40°C |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| Mixing | Mix the base and curing agent and stir thoroughly with a power tool |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| Mixing ratio | Base : curing agent = 9:1 (by weight) |
| Pot Life | 10°C | 20°C | 30°C |
| Pot life | 8hrs | 5hrs | 2.5hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| Application Methods | Airless spray, air spray, brush, roller |
| Nozzle tip | Nozzle size | Graco 417, 517 |
| Nozzle pressure | Output pressure | ≥10Mpa |
| Thinning ratio | 5–15% by weight |
| Thinner | Epomarine Thinner 20# |
|---|---|
| Thinner | Epoxy Thinner 20# |
| Drying time & | Temperature | 5°C | 10°C | 20°C | 30°C | |
| Overcoating interval | Surface dry | Touch dry | 6hrs | 3hrs | 1hrs | 0.5hrs |
| Drying time & recoat interval | Touch dry | Semi-hard dry | 30hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | Minimum recoat interval | 30hrs | 24hrs | 16hrs | 12hrs | |
| Max. interval | Maximum recoat interval | 7days | ||||
| Applied Substrate | Bare steel |
|---|---|
| Suitable substrates | Bare steel |
| Preceding coat | SD Zinc 500, or according to the coating systems of Kansai. |
| Suitable for undercoating | SD Zinc 500, or refer to our recommended system. |
| Typical topcoat | Epomarine EX-500, PU FINISH HD-50 or according to the coating system of Cosco |
| Suitable for overcoating | Kansai. |
Various epoxy intermediate coats, polyurethane topcoats, or refer to our coating system
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
| Shelf life | 12 months from date of production (25°C) |
|---|---|
| Shelf life | 12 months from date of production (25 °C) |
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
The information provided in this data sheet is, to the best of our knowledge, the most complete and accurate information currently available. As the conditions of product use are beyond our control, this information carries no warranty, and we are responsible to the buyer only in the selection of the product. As our products and production processes are continuously developed, the content of this data sheet is subject to change at any time, and all information herein is subject to our confirmation. Confirm that the data sheet in hand is the latest version before using the product.
| Issued Date | 2019/11/5 |
|---|---|
| Issue date | 2019/11/5 |
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
