Iron Red Oil-based Anticorrosive Paint Y53-32 is a primer. Suitable for use as an anticorrosive primer on steel structures with ordinary indoor and outdoor requirements. An oil-based anticorrosive paint formulated from refined drying vegetable oil, iron oxide red and other anticorrosive pigments, extenders, driers, additives and solvents. Compatible with oil-based, phenolic and alkyd traditional products. Parameters on this page: volume solids 60 ± 3%; dry film thickness 35 µm; theoretical spreading rate 102 g/m².
Source: KAILIN original technical data sheet (TDS) 'Iron Red Oil-based Anticorrosive Paint Y53-32'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 60 ± 3% |
|---|---|
| Dry Film Thickness | 35µm |
| Theoretical Spreading Rate | 102 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 40°C |
| Thinner | Thinner 104 |
| Colour / Appearance | Iron red |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Formulated from refined drying vegetable oil, iron oxide red and other anticorrosive pigments, extenders, driers, additives and
solvents, as an oil-based anticorrosive paint.
Compatible with traditional products such as oil-based, phenolic and alkyd
| Use | Suitable for use as an anticorrosive primer on steel structures with ordinary indoor and outdoor requirements. |
|---|---|
| Appearance | Iron red. |
| Volume Solids | 60 ± 3% (measured per GB/T 9272 eqv ISO 3233:1998) |
|---|---|
| Dry Film Thickness | 35µm |
| Wet Film Thickness | 64µm |
| Theoretical quantity | 102g/m² |
| Flash Point | 40°C |
| Drying time (25 °C) | Touch dry ≤ 6 h, hard dry ≤ 24 h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 48h | 24h | 20h |
| Maximum | 3 months | ||
| Recommended number of coats | 2 coats, dry film thickness above 70 µm |
|---|---|
| Subsequent coat | Various oil-based, phenolic and alkyd topcoats |
Steel with mill scale: blast-clean to Sa 2 (or Sa 2.5; acid pickling can also be used to remove mill scale and rust)
Mill-scale-free steel: grind with abrasive discs to St 3
Shop-primed steel: re-prepare damaged and rusted film areas, abrading to St 3
Welded, flame-cut or heat-corrected areas: grind to St 3
Substrates with existing coating (same type): remove loose, failed old coating and rust; prepare with pneumatic or power grinding tools to St 3
| Airless Spray | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.4-0.5mm |
| Spray output pressure | 12–15 MPa (approx. 120–150 kg/cm²) |
| Air Spray | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–10% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.4 MPa (approx. 3–4 kg/cm²) |
| Roller/brush | Thinner 104; thinning quantity 0–3% (by paint weight) |
|---|---|
| Cleaning solvent | Thinner 104 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 20 L pail, 29 kg |
| Shelf Life | 12 months |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
