Epoxy Deck Anti-skid Paint in Various Colours H42-31 is an epoxy paint. It is used as an anti-skid paint on steel ship deck structures. A two-component epoxy deck paint or anti-skid paint composed of epoxy resin, polyamide hardener, anti-rust pigments, extender pigments, additives and solvents. Parameters on this page: volume solids 69 ± 3% (after mixing), dry film thickness 90 µm, theoretical spreading rate 179 g/m².
Parameter source: KAILIN manufacturer's Technical Data Sheet (TDS) "Epoxy Deck Anti-skid Paint in Various Colours H42-31"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 69 ± 3% (after mixing) |
|---|---|
| Dry Film Thickness | 90µm |
| Theoretical Spreading Rate | 179 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | Thinner 103 |
| Mixing Ratio | Component A : Component B = 3:1 (by weight) |
| Colour / Appearance | Grass green, iron red, grey and other colours |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Composed of epoxy resin, polyamide hardener, anti-rust pigments, extender pigments, additives and solvents
two-component epoxy deck paint or anti-skid paint.
| Use | For use as an anti-slip coating on steel deck structures of ships. |
|---|---|
| Appearance | Grass green, iron red, grey and other colours |
| Volume Solids | 69 ± 3% (determined according to GB/T9272 eqv ISO3233:1998) (after mixing) |
|---|---|
| Ratio: | Component A : Component B = 3:1 (by weight) |
| Dry Film Thickness | 90µm |
| Wet Film Thickness | 130µm |
| Theoretical quantity | 179g/m² |
| Flash Point | Component A 27°C, Component B 27°C |
| Drying time (25 °C) | Touch dry ≤ 4h, hard dry ≤ 24h, fully cured 7 days |
| Induction time (after mixing) (25 °C) | 30min |
| Pot life (after mixing) (25 °C) | 6h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 48h | 24h | 12h |
| Maximum | 14d | 7d | 5d |
| Recommended number of coats | 2–3 coats, dry film thickness 180–270 µm (excluding the thickness of emery grit). |
|---|
H06-4 epoxy zinc-rich anti-corrosive primer, E06-1 inorganic zinc silicate anti-corrosive primer, 842 epoxy micaceous iron oxide anti-corrosive primer and similar products
At temperatures below 5°C the reaction between epoxy and hardener stops; outdoor application is not recommended
Application may be carried out by airless spray or brush.
(1) On H06-4 epoxy zinc-rich anti-corrosive primer or E06-1 inorganic zinc silicate anti-corrosive primer, 842 epoxy micaceous iron oxide
anti-corrosive primer, first apply one coat of epoxy deck anti-slip paint; before the film dries, broadcast emery grit or tyre
powder so that it adheres to the film; the next day sweep away the particles that have not adhered, then apply the 2nd and
3rd coats of deck anti-slip paint, so that the anti-slip material is set between the two coats of film.
Consumption of the 1st coat approx. 0.4 kg/m², emery grit 3–4 kg/m²,
Consumption of the 2nd and 3rd coats approx. 0.3 kg/m². Deck paint:emery grit = 1:3 (by weight)
or deck paint:tyre powder = 1:0.1–0.15 (by weight)
(2) Stir 10–20% tyre powder (passing 20 mesh) into the deck paint and scrape onto the deck with a scraper.
(3) When used as an ordinary deck paint, no emery grit or tyre powder is required; after components A and B are mixed and allowed to induce
then apply by spray or brush onto the previous primer coat.
| Thinner | Thinner 103 |
|---|---|
| Thinning quantity | 0–3% (by paint weight) |
| Cleaning solvent | Thinner 103 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | Component A 20 L drum, 25.5 kg; Component B 10 L drum, 8.5 kg |
| Shelf Life | 12 months |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
