Silver Alkyd Enamel C04-48 is an alkyd paint used as a topcoat. It is suitable for the protection and decoration of steel surfaces of boilers, steam pipelines, radiators and mechanical equipment inside machine rooms. A two-component topcoat composed of alkyd resin, driers, additives, solvents, etc. and aluminium powder. It has a certain degree of heat resistance and can be used for a long time at 200 °C. Parameters on this page: volume solids 30 ± 3%, dry film thickness 20 µm, theoretical spreading rate 67 g/m².
Parameter source: KAILIN original technical data sheet (TDS) "Silver Alkyd Enamel C04-48"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 30 ± 3% |
|---|---|
| Dry Film Thickness | 20µm |
| Theoretical Spreading Rate | 67 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | 35°C |
| Thinner | Thinner 104 |
| Mixing Ratio | Component A : Component B = 4:1 (by weight) |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
| Composition | A two-component topcoat composed of alkyd resin, driers, additives, solvents, etc. and aluminium powder. |
|---|
Has a certain degree of heat resistance and can be used for a long time at 200 °C.
| Use | Suitable for the protection and decoration of steel surfaces of boilers, steam pipelines, radiators and mechanical equipment inside machine rooms. |
|---|---|
| Appearance | Aluminium colour. |
| Volume Solids | 30 ± 3% (determined according to GB/T9272 eqv ISO3233:1998) |
|---|---|
| Mixing ratio | Component A : Component B = 4:1 (by weight) |
| Dry Film Thickness | 20µm |
| Wet Film Thickness | 67µm |
| Theoretical quantity | 67g/m² |
| Flash Point | 35°C |
| Drying time (25 °C) | Touch dry ≤ 4 h; hard dry ≤ 24 h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 48h | 24h | 16h |
| Maximum | Unlimited | ||
| Recommended number of coats | 2 coats, dry film thickness 40 µm. |
|---|
Can be used with 711 Red Lead Oil-based Anti-corrosive Paint, 712 Red Lead Phenolic Anti-corrosive Paint, 725 Zinc Yellow Phenolic Anti-corrosive Paint,
706 Anti-corrosive Paint, C53-41 Iron Oxide Multi-purpose Primer, C53-38 Aluminium Iron Anti-corrosive Paint and various oil-based,
alkyd and phenolic primers; when used at high temperatures below 200 °C, it can be applied directly to steel surfaces,
without the need for an anti-corrosive primer.
Before use, add the aluminium paste to the paint in the specified proportion, stir thoroughly, and filter through a 0.2 mm (80 mesh) copper wire cloth screen before use.
| Airless Spray | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.4-0.5mm |
| Spray output pressure | 12–15 MPa (approx. 120–150 kg/cm²) |
| Air Spray | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–10% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.5 MPa (approx. 3–5 kg/cm²) |
| Roller/brush | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–3% (by paint weight) |
| Cleaning solvent | Thinner 104 |
|---|---|
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | Component A: 17 kg in a 20 L drum; Component B: 4.3 kg in a 4 L drum. |
| Shelf Life | 10 months |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
