Iron Oxide Alkyd Cargo Hold Paint 887, 887-1 is an alkyd paint. Suitable as a topcoat for non-corrosive dry cargo holds on ships. A cargo hold topcoat formulated from alkyd resin and drying vegetable oil cooked varnish, iron oxide red, driers, additives, and solvents. Exhibits good intercoat adhesion with phenolic and alkyd primers. Parameters on this page: volume solids 44 ± 3%, dry film thickness 30 µm, theoretical spreading rate 90 g/m².
Parameter source: KAILIN original technical data sheet (TDS) 'Iron Oxide Alkyd Cargo Hold Paint 887, 887-1'; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 44 ± 3% |
|---|---|
| Dry Film Thickness | 30µm |
| Theoretical Spreading Rate | 90 g/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 35°C |
| Thinner | Thinner 104 |
| Colour / Appearance | Iron red |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
A cargo hold topcoat formulated from alkyd resin and drying vegetable oil cooked varnish, iron oxide red, driers, additives, and sol
vents, etc.
Good intercoat adhesion with phenolic and alkyd primers
| Use | Suitable as a topcoat for non-corrosive dry cargo holds on ships. |
|---|---|
| Appearance | Iron red |
| Volume Solids | 44 ± 3% (measured according to GB/T 9272 eqv ISO 3233:1998) |
|---|---|
| Dry Film Thickness | 30µm |
| Wet Film Thickness | 68µm |
| Theoretical quantity | 90g/m² |
| Flash Point | 35°C |
| Drying Time (25 °C) | Touch dry ≤ 4 h; hard dry ≤ 24 h |
| Recoat interval | |||
| Temperature | 5°C | 20°C | 30°C |
| Minimum | 48h | 24h | 16h |
| Maximum | Unlimited |
|---|---|
| Recommended number of coats | 2 coats, dry film thickness greater than 60 µm |
Compatible with 712 Red Lead Phenolic Anticorrosive Paint, 716 Red Lead Alkyd Anticorrosive Paint, 706 Anticorrosive Paint, C53-41
Iron Oxide Multi-purpose Primer and other phenolic and alkyd anticorrosive paints, and also with 842 Epoxy MIO Anticorrosive Paint
for use.
| Airless Spray | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–5% (by paint weight) |
| Nozzle tip size | 0.4-0.5mm |
| Spray output pressure | 12–15 MPa (approx. 120–150 kg/cm²) |
| Air Spray | |
| Thinner | Thinner 104 |
| Thinning quantity | 0–10% (by paint weight) |
| Nozzle tip size | 2.0-3.0mm |
| Air pressure | 0.3–0.5 MPa (approx. 3–5 kg/cm²) |
| Roller/brush | Thinner 104; thinning quantity 0–3% (by paint weight) |
|---|---|
| Cleaning solvent | Thinner 104 |
| Safety measures | See the Safety Data Sheet (MSDS) of Shanghai Kailin Paint Factory. |
| Packaging | 20 L drum, 23 kg |
| Shelf Life | 12 months |
| Notes | To use this product correctly, read the Application Guide in this data sheet carefully. |
The above information and data for this product are accumulated from our tests and practical experience
accumulated, and may serve as an application guide. For application carried out under conditions unknown to us, we
We guarantee only the quality of the paint itself and accept no responsibility for other matters. We
and reserve the right to make modifications as the product is improved.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
