Intersmooth 100HS SPC Tin-free Antifouling Paint is an antifouling paint. This antifouling paint has fast polishing characteristics, designed to provide excellent antifouling performance during the outfitting period. A copper-free, self-polishing copolymer (SPC) outfitting antifouling paint with patented acrylate metal technology. Parameters on this page: volume solids 55% ± 2%, dry film thickness 75 µm, theoretical spreading rate 7.33 m²/L. Comparable products of the same brand: Intercept 7000 Linear Polishing Antifouling Paint, Intercept 8500 LPP Tin-free Linear Polishing Polymer Antifouling Paint, Interflex 8700 SPC Tin-free Self-polishing Copolymer Antifouling Paint.
Data source: International original Technical Data Sheet (TDS), "Intersmooth 100HS SPC Tin-free Antifouling Paint"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 55% ± 2% |
|---|---|
| Dry Film Thickness | 75 µm |
| Theoretical Spreading Rate | 7.33 m²/L |
| VOC | 410 g/L (neat) (EPA Method 24). VOC values… |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Colour / Appearance | BEA114 dark red, BEA118 medium brown |
| Gloss | |
| Packaging Specifications | Packaging weight |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
A copper-free, self-polishing copolymer (SPC) outfitting antifouling paint with patented acrylate metal technology.
This antifouling paint has fast polishing characteristics, designed to provide excellent antifouling performance during the outfitting period.
Compatible with a range of International Paint conventional antifouling paints.
Specially designed for ocean-going and offshore vessels.
| Colour | BEA114 dark red, BEA118 medium brown |
|---|---|
| Topcoat/gloss | Gloss |
| Component B (curing agent) | N/A |
| Volume Solids | 55% ±2% (ISO 3233:1998) |
| Standard film thickness | 75 µm dry film thickness (136 µm wet film thickness) |
| Theoretical Spreading Rate | At 75 µm dry film thickness, the theoretical spreading rate is 7.33 m²/L, allowing an appropriate loss factor. |
| Application Methods | Airless Spray |
| Flash Point | Single component 26 °C |
| Induction Time | Not required |
| Drying data | 5°C | 10°C | 25°C | 35°C |
| Touch dry [ISO 9117/3:2010] | 6 h | 5 h | 4 h | 2 h |
| Before launching | 18 h | 16 h | 13 h | 11 h |
| Recoat data — see the “Limitations” section | Substrate Temperature | |||||||
| 5°C | 10°C | 25°C | 35°C | |||||
| When recoating the following products | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum |
| Intersmooth 100HS | 6 h | Unlimited | 5 h | Unlimited | 4 h | Unlimited | 3 h | Unlimited |
SPC
| Volatile Organic Compounds | 410 g/L (neat) (EPA Method 24). VOC values are typical values provided for reference only. They may vary with factors such as colour and normal manufacturing tolerances. |
|---|
This product contains no organotin compounds acting as biocides and complies with the international treaty adopted by the IMO in October 2001 on the control of harmful antifouling systems on ships (IMO document AFS/CONF/26).
When used as part of an approved system, this coating holds the following certificates: the product has been approved by the following classification societies as compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001): • Lloyd's Register • DNV GL. For details, consult your local International Paint representative.
For the paint system best suited to the surface to be protected, consult your local representative.
Applied in accordance with the standard Worldwide Marine Specifications.
All surfaces to be coated must be clean, dry and free of contaminants.
Wash with high-pressure or ordinary fresh water as appropriate, and remove all oil, grease, soluble contaminants and other foreign matter in accordance with the SSPC-SP1 solvent cleaning standard.
Newbuildings: for use in approved conventional antifouling systems. Applied as the final coat for fouling protection of newbuildings from launching to delivery.
Before applying this product, ensure the existing conventional antifouling coating is clean and dry.
Secondary surface preparation may be required. Consult the local technical service representative.
This coating is a single-component product; stir thoroughly with a power mixer before application.
Not recommended. Only in special cases, use International GTA007 (maximum 5% by volume). Do not thin beyond the limits of local environmental regulations.
Recommended nozzle tip size 0.66–0.79 mm (26–31 thou); total fluid pressure at the nozzle not less than 176 kg/cm² (2500 psi)
Conventional spray application is not recommended.
Brush application is recommended for small areas only. Several coats may be required to achieve the specified film thickness.
Roller application is recommended for small areas only. Several coats may be required to achieve the specified film thickness.
Flush all equipment thoroughly with International thinner. All unused paint must be stored in tightly closed containers. Partly filled containers may show skinning and/or increased viscosity after storage. Strain the paint before use.
If welding or flame cutting is performed on metal coated with this product, dust and fumes will be released; use suitable personal protective equipment and local exhaust ventilation. In North America, follow the instructions in ANSI/ASC Z49.1 “Safety in Welding and Cutting”.
All work related to the application and use of this product must comply with national health, safety and environmental protection standards and regulations.
Before using this product, obtain, read and follow the health and safety information in the Material Safety Data Sheet for the product. Read and observe all precautions in the Material Safety Data Sheet and on the container label. If these warnings and requirements are not fully understood, or cannot be strictly observed, do not use the product. During application and drying of the product, provide adequate ventilation and protective measures to keep solvent vapour concentrations within safe limits, so as to prevent poisoning or oxygen deficiency. Take protective measures to avoid skin and eye contact with the product (e.g. gloves, goggles, face shield, barrier cream). Specific safety measures depend on the application method and working environment.
Emergency contact: USA/Canada — medical 1-800-854-6813; Europe — tel. (44) 191 4696111, hospital and doctor (44) 207 6359191; other regions — contact the regional office
After immersion, the colour of this product darkens.
Apply in good weather. The temperature of the surface to be coated must be at least 3 °C above the dew point. Unless otherwise specifically instructed, raise the paint temperature to between 21 and 27 °C before mixing and application to achieve optimum application performance. Unmixed paint (in sealed containers) must be stored protectively as specified in the Storage section of this product data sheet. The technical and application data given here are intended as general guidance for establishing an application procedure. Test results are obtained in a controlled laboratory environment, and International Paint does not claim that the published test results, or any other test results, accurately represent results obtained in all site environments. Because application, environmental and design parameters vary widely, care must be exercised in coating selection, performance verification and use.
Packaging size volume; packaging
| 15 L | 15 L; 18 L. For other package sizes, consult International Paint. |
|---|
| Packaging Specifications | Packaging weight |
|---|---|
| 15 L | 24.25 kg |
| Shelf life | 6 months at 25 °C. Inspect before use thereafter. Store in a cool, dry place, away from heat sources and sources of ignition. |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
