Hempel's Epoxy Tie Coat 49183 is an epoxy coating. For immersion use, it can also replace the second anticorrosive primer of an underwater coating system, acting as a tie coat for antifouling. Hempel's Epoxy Tie Coat 49183 is a two-component anticorrosive epoxy resin paint. Parameters on this page: volume solids 57 ± 2%; dry film thickness 100 µm; theoretical spreading rate 5.7 m²/L. Comparable products from the same brand: Hempel's Fibre-reinforced Strong Epoxy 47510, Hempel's Multipurpose Epoxy High-build 500 Winter-grade, Hempel's Multipurpose Epoxy High-build 500.
Source: HEMPEL original technical data sheet (TDS) 'Hempel's Epoxy Tie Coat 49183'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 57 ± 2% |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 5.7 m²/L |
| VOC | 397 g/L (China) |
| Density / Specific Gravity | 1.3 kg/L |
| Number of Components | Two-component |
| Flash Point | 31°C |
| Thinner | HEMPEL's Thinner 08450 |
| Colour / Appearance | Jet Black 19990 |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
49183
Hempel's Epoxy Tie Coat 49183 is a two-component anticorrosive epoxy resin paint.
For atmospheric and immersion service, used as a tie coat between epoxy resin paint and physically drying coatings. For immersion use, it can also replace the second anticorrosive primer of an underwater coating system, acting as a tie coat for antifouling.
| Product safety | Flash point 31 °C |
|---|
| Regulations | Value |
| European Union | 397 g/L |
| USA (coatings) | 397 g/L |
| USA (regulatory) | 397 g/L |
| Canada | 397 g/L |
| China | 397 g/L |
| Hong Kong | 397 g/L |
| South Korea | 397 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 49183 |
|---|---|
| Product components | Base 49187 |
Hardener 98191
| Standard colour* / code | Jet Black 19990 |
|---|
Black 19990
| Gloss | Semi-flat |
|---|---|
| Volume solids | 57 ± 2% |
| density | 1.3 kg/L |
| Recommended dry film thickness | 100 µm |
49183
For further details, refer to the separate Hempel document Surface Preparation Guide.
Base 49187 : Hardener 98191 (7:1 by volume)
For multi-component products, use a container of suitable volume. Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08450 |
|---|---|
| Cleaning solvent | HEMPEL's Tool Cleaner 99610 |
| Product temperature | 20°C |
|---|---|
| Pot Life | 2½ h |
| Tools | Maximum thinning volume | Application parameters |
| Airless Spray | 5% | Nozzle pressure: 23 MPa. Tip size: 0.58–0.58 mm |
| Brush | 5% | Not applicable. |
At low paint temperature, additional thinning may be required, giving lower film build and slower drying. With brush or roller, multiple coats are required to reach the specified dry film thickness. Spray parameters are indicative and can be adjusted on site. Pressure values apply to material at 20 °C. (*For other application methods, consult the company representative!).
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 50 µm | 125 µm | 100 µm |
| Wet Film Thickness | 87 µm | 218 µm | 174 µm |
| Theoretical Spreading Rate | 11 m²/L | 4.6 m²/L | 5.7 m²/L |
Depending on the end use and service area, the product may be specified at film thicknesses other than those indicated. This will alter the spreading rate, drying and curing times and recoat interval. To achieve optimum performance, avoid excessive film thickness.
If used as a sealer over old antifouling, all possible leached layers, copper salt layers or old layers with weak intercoat adhesion shall be removed before use.
49183
| Surface temperature | 20°C |
| Surface Dry | 30 min |
| Through dry | 5 h |
Measured at 100 µm dry film thickness under standard conditions; see Hempel's explanatory notes.
Hempel's specifications supersede all guidance shown in the recoat table.
| Product name | 0°C | 10°C | 20°C | |
| Immersion | ||||
|---|---|---|---|---|
| HEMPEL's Tin-free Self-polishing Antifouling Globic 9000 78900 | Minimum | 23 h | 10 h | 5 h |
| Maximum | 22 days | 10 days | 5 days | |
| Atmospheric, moderate | ||||
| HEMPEL's Acrylic Topcoat 56360 | Minimum | 23 h | 10 h | 5 h |
| Maximum | 27 days | 12 days | 6 days | |
For products of the same generic chemical composition, recoat times are for reference only.
For further information, refer to Hempel's specifications.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
| Binder | 36 months |
| Curing agent | 24 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 7.7 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
49183
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item numbers of Hempel's Epoxy Tie Coat 49183 are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| 49183-25150 | — | 20 L |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
