Hempel's Fast Epoxy 47650 is an epoxy coating. Hempel's Fast Epoxy 47650 can be used all year round, with an application temperature down to -10 °C (14 °F), and is also suitable for situations requiring fast recoating. Hempel's Fast Epoxy 47650 is a high-solids fast-drying epoxy coating; the hard film formed after curing offers good anticorrosive performance and high resistance to soft and hard cargoes and seawater. Parameters on this page: volume solids 77 ± 2%; dry film thickness 125 µm; theoretical spreading rate 6.2 m²/L. Comparable products from the same brand: Hempel's Fibre-reinforced Strong Epoxy 47510, Hempel's Multipurpose Epoxy High-build 500 Winter-grade, Hempel's Multipurpose Epoxy High-build 500.
Source: HEMPEL original technical data sheet (TDS) 'Hempel's Fast Epoxy 47650'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 77 ± 2% |
|---|---|
| Dry Film Thickness | 125 µm |
| Theoretical Spreading Rate | 6.2 m²/L |
| VOC | 222 g/L (China) |
| Density / Specific Gravity | 1.5 kg/L |
| Number of Components | Two-component |
| Flash Point | 25°C |
| Thinner | HEMPEL's Thinner 08450 |
| Colour / Appearance | Venetian Red 50630 |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
47650
Hempel's Fast Epoxy 47650 is a high-solids fast-drying epoxy coating; the hard film formed after curing offers good anticorrosive performance and high resistance to soft and hard cargoes and seawater.
Hempel's Fast Epoxy 47650 is a dedicated heavy-duty coating recommended for maintenance of bulk carrier cargo holds.
Also recommended for general on-board maintenance and repair, such as decks, deckhouses, topsides, hatch covers, ballast tanks and cargo holds.
Hempel's Fast Epoxy 47650 can be used all year round, with an application temperature down to -10 °C (14 °F), and is also suitable for situations requiring fast recoating. Hempel's Fast Epoxy 47650 is not recommended for newbuildings.
- Complies with US FDA and EU food regulations for contact with dry food. For details, consult Hempel.
| Product safety | Flash point 25 °C |
|---|
| Regulations | Value |
| European Union | 222 g/L |
| USA (coatings) | 222 g/L |
| USA (regulatory) | 222 g/L |
| China | 222 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 47650 |
|---|---|
| Product components | Base 47659 |
Hardener 97065
| Standard colour* / code | Venetian Red 50630 |
|---|
Brown-red 50630
| Gloss | Flat |
|---|---|
| Volume solids | 77 ± 2% |
| density | 1.5 kg/L |
| Recommended dry film thickness | 125 µm |
47650
- Sound areas of the existing coating should be treated by blasting or water jetting to give a dense, uniform roughness, ensuring adhesion.
For further details, refer to the separate Hempel document Surface Preparation Guide.
Base 47659 : Hardener 97065 (4:1 by volume)
For multi-component products, use a container of suitable volume. Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08450 |
|---|---|
| Cleaning solvent | HEMPEL's Tool Cleaner 99610 |
HEMPEL's Thinner 08450
| Product temperature | 10°C | 20°C | 30°C |
| Pot Life | 75 min | 60 min | 45 min |
| Tools | Application parameters |
|---|
Nozzle pressure: 25 MPa
Tip size: 0.43–0.58 mm. With brush or roller, multiple coats are required to reach the specified dry film thickness. Spray parameters are indicative and can be adjusted on site. Pressure values apply to material at 20 °C. (*For other application methods, consult the company representative!).
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 100 µm | 150 µm | 125 µm |
| Wet Film Thickness | 130 µm | 195 µm | 162 µm |
| Theoretical Spreading Rate | 7.7 m²/L | 5.1 m²/L | 6.2 m²/L |
To achieve optimum performance, avoid excessive film thickness.
- Ideal spray performance is obtained at paint temperatures of 15–30 °C [59–86 °F]; outside this range, additional thinning may be required.
| Surface temperature | -10°C | 0°C | 20°C | 40°C |
| Touch Dry | 4 h | 2 | ¾ | ¼ |
| Hard Dry | 18 h | 9 | 2½ | ¾ |
| Fully cured | 45 days | 22 | 5 | 1 |
47650
Hempel's specifications supersede all guidance shown in the recoat table.
| Product name | -10°C | 0°C | 20°C | 40°C | |
| Atmospheric, moderate | |||||
|---|---|---|---|---|---|
| HEMPEL's Rapid Epoxy 47650 | Minimum | 18 h | 9 h | 2 h | 60 min |
| Maximum | 14 days | 7 days | |||
| HEMPEL's Polyurethane Topcoat 55210 | Minimum | 27 h | 14 h | 3 h | 90 min |
| Maximum | 72 h | 36 h | |||
| Atmospheric, severe | |||||
| HEMPEL's Rapid Epoxy 47650 | Minimum | 18 h | 9 h | 2 h | 60 min |
| Maximum | 14 days | 7 days | |||
| Immersion | |||||
| HEMPEL's Rapid Epoxy 47650 | Minimum | 18 h | 9 h | 2 h | 60 min |
| Maximum | 14 days | 7 days | |||
For products of the same generic chemical composition, recoat times are for reference only.
For further information, refer to Hempel's specifications.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
| Binder | 36 months |
| Curing agent | 18 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 5.9 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
47650
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
