Hempel's Polyurethane Clear Varnish is a polyurethane coating used as a topcoat. Hempel's Polyurethane Clear Varnish is a highly durable clear varnish recommended for wood and other substrates indoors and outdoors. Hempel's Polyurethane Clear Varnish 05570 is a two-component polyurethane clear varnish with high gloss retention and high abrasion, water, sunlight, weathering and wear resistance. Parameters on this page: volume solids 45 ± 2%; dry film thickness 25 µm; theoretical spreading rate 18 m²/L. Comparable products from the same brand: Hempel's Polyurethane High-build Topcoat 55610, Hempel's Polyurethane High-build Topcoat 55613, Hempel's Polyurethane High-build Topcoat 5561B.
Source: HEMPEL original technical data sheet (TDS) 'Hempel's Polyurethane Clear Varnish'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 45 ± 2% |
|---|---|
| Dry Film Thickness | 25 µm |
| Theoretical Spreading Rate | 18 m²/L |
| VOC | 485 g/L (China) |
| Density / Specific Gravity | 1 kg/L |
| Number of Components | Two-component |
| Flash Point | 27°C |
| Thinner | HEMPEL's Thinner 08080 |
| Colour / Appearance | Clear 00000 |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Hempel's Polyurethane Clear Varnish 05570 is a two-component polyurethane clear varnish with high gloss retention and high abrasion, water, sunlight, weathering and wear resistance.
Hempel's Polyurethane Clear Varnish is a highly durable clear varnish recommended for wood and other substrates indoors and outdoors. Can be sprayed directly onto wood.
| Product safety | Flash point 27 °C |
|---|
| Regulations | Value |
| European Union | 485 g/L |
| USA (coatings) | 485 g/L |
| USA (regulatory) | 485 g/L |
| Canada | 485 g/L |
| China | 485 g/L |
| Hong Kong | 485 g/L |
| South Korea | 485 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 05570 |
|---|---|
| Product components | Base 05579 |
Curing Agent 95370
| Standard colour / code | Clear 00000 |
|---|---|
| Gloss | High gloss |
| Volume solids | 45 ± 2% |
| density | 1 kg/L |
| Recommended dry film thickness | 25 µm |
New/uncoated wood: saturate with a suitable wood preservative (except teak and vacuum-impregnated wood).
For further details, refer to the separate Hempel document Surface Preparation Guide.
Base 05579 : Hardener 95370 (7:1 by volume)
Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08080 |
|---|
HEMPEL Thinner 08880
| Product temperature | 20°C |
|---|---|
| Pot Life | 12 h |
Tool, max thinning by volume, application parameters: airless spray 5%, tip size 0.43–0.48 mm
| Air Spray | 5% | Not applicable. |
| Brush | 5% | Not applicable. |
Spray parameters are indicative and may be adjusted to suit site conditions. Pressure figures apply to the material at 20 °C. (*For other application methods, consult the company representative.)
| Specification range | Low | High | Recommended |
| Wet Film Thickness | 44 µm | 66 µm | 55 µm |
| Theoretical Spreading Rate | 23 m²/L | 15 m²/L | 18 m²/L |
The practical consumption factor may vary with application conditions, equipment and workmanship.
| Surface temperature | 20°C |
| Touch Dry | 4 h |
| Fully cured | 7 days |
Measured at 25 µm dry film thickness under standard conditions; see Hempel's explanatory notes.
Hempel's specifications supersede all guidance shown in the recoat table.
| Product name | 10°C | 20°C | 30°C | 40°C | |
| Atmospheric, mild | |||||
|---|---|---|---|---|---|
| HEMPEL's Polyurethane Varnish | Minimum | 12 h | 8 h | 4 h | 2 h |
| Maximum | 60 days | 30 days | 22 days | 15 days | |
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
| Binder | 24 months |
| Curing agent | 24 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| GWP (Global Warming Potential) | 9.2 g CO₂e/m² |
|---|
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
